Q. Cemented carbide tools are not suitable for cutting

View solution

Q. The difference between gross & net calorific values of fuel is due to the

View solution

Q. Which of the following is preferred for rivetting ?

View solution

Q. Heating the hypoeutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called

View solution

Q. The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm.

View solution

Q. Steel balls are manufactured by

View solution

Q. __________ temperature remains constant during adiabatic saturation process of unsaturated air.

View solution

Q. The best lubricants for a machine working at high temperature & load is

View solution

Q. One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W . m⁻¹ . k⁻¹ and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is

View solution

Q. Which of the following is not a principal alloying element for the structural steel?

View solution

Q. Metalloids

View solution

Q. Pick out the wrong statement

View solution

Q. Lead is poured into the joints between two __________ pipes.

View solution

Q. 'Ice point' is designated on Farenhite temperature scale by

View solution

Q. The phenomenon occurring during explosion of a hydrogen bomb is

View solution

Q. Square steel key is normally strong in failure by shear & crushing. Keys are normally made of __________ steel bars.

View solution

Q. Nitriding of a steel part does not increase its

View solution

Q. __________ of grey cast iron produces white cast iron.

View solution

Q. As the fluid flow rate increases, the float of the rotameter

View solution

Q. The best guide to judge the general quality of water is the measurement of its

View solution