Q. Prandtl and Reynold's analogies are identical for Prandtl number value of

View solution

Q. The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid

View solution

Q. In evaporators, lowering the feed temperature

View solution

Q. Unsteady state heat conduction occurs, when

View solution

Q. What is the absorptivity of a black body ?

View solution

Q. Mode of heat transfer in which the fluid moves under the influence of changes in fluid pressure produced by external work is called

View solution

Q. Baffle spacing

View solution

Q. Boiling point elevation of a solution of NaOH

View solution

Q. Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity ?

View solution

Q. At what value of Prandtl number, the hydrodynamic and thermal boundary layers of a fluid flowing over a heated plate will be identical ?

View solution

Q. Fourier's law of heat conduction applies to __________ surfaces.

View solution

Q. __________ chart is known as transient heat conduction chart.

View solution

Q. In which mode of heat transfer, the Biot number is important ?

View solution

Q. __________ paint has the minimum absorption co-efficient.

View solution

Q. Asymptotic conditions is reached, when for a fluid flowing in laminar flow through a long tube

View solution

Q. 1000 kg of wet solids are to be dried from 60% to 20% moisture (by weight). The mass of moisture removed in kg is

View solution

Q. Which is the most suitable for the con-certration of highly concentrated solution?

View solution

Q. The purpose of floating head in a heat exchanger is to

View solution

Q. 1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m² and the overall heat transfer co-efficient to the liquid is 1500 W/m².°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be

View solution

Q. Overall thermal resistance for conductive heat transfer through a series of flat resistances is equal to the

View solution