Q. When does the heat generated by fluid friction becomes appreciable compared to the heat transferred between the fluids ?

View solution

Q. The Sieder-Tate correlation for heat transfer in turbulent flow in pipe gives Nu α Re^0.8, where, Nu is the Nusselt number and Re is the Reynolds number for the flow. Assuming that this relation is valid, the heat transfer co-efficient varies with the pipe diameter (D) as

View solution

Q. A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time

View solution

Q. LMTD for evaporators & condensers for a given terminal parameters & set of conditions for counterflow is equal to that for parallel flow. In such heat exchangers, with one of the fluids condensing or evaporating, the surface area required is the least in the __________ flow.

View solution

Q. Thermal diffusivity of a material

View solution

Q. h.D/K is called the __________ number.

View solution

Q. Prandtl number is the ratio of

View solution

Q. Conductance is given by(where, x = thickness, A = heat flow area, K = thermal conductivity.)

View solution

Q. Heat flux, as defined in heat flow is analogous to __________ in electricity flow.

View solution

Q. The wavelength at which the maximum monochromatic emissive power occurs for a black body, is (where, T = absolute temperature of the black body)

View solution

Q. Which is the most suitable for cold viscous feed?

View solution

Q. Dropwise condensation is promoted on a/an __________ surface.

View solution

Q. At Pr > 1, conduction in an ordinary fluid flowing through a heated pipe is limited to the

View solution

Q. In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator.

View solution

Q. A tank painted with which of the following coloured paints, would heat up maximum by radiation from sun ?

View solution

Q. The separation of liquid droplets from the vapor is done by a/an __________ , in the evaporators.

View solution

Q. If a single tube pass heat exchanger is converted to two pass, then for the same flow rate, the pressure drop per unit length in tube side will

View solution

Q. A steel sphere of radius 0.1 m at 400°K is immersed in an oil at 300°K. If the centre of the sphere reaches 350°K in 20 minutes, how long will it take for a 0.05 m radius steel sphere to reach the same temperature (at the centre) under identical conditions ? Assume that the conductive heat transfer co-efficient is infinitely large.

View solution

Q. Nucleate boiling is promoted

View solution

Q. In forced circulation, the heating element is injected

View solution