E-PolyLearning

Discussion Forum

Que. In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase.
a. gas
b. liquid
c. both (a) & (b)
d. neither (a) nor (b)
Correct Answer:liquid
Confused About the Answer? Ask fellow aspirants for Details Here
Already Know Explanation? Add it Here to help others.

More Questions Like this:

Which of the following adsorbent is used to decolourise yellow glycerine ?
The adiabatic saturation curve for a vapour-gas mixture is
The relation, Sc = Pr = 1, is valid, when the mechanism of __________ ansfer is same.
Percentage saturation is __________ the relative saturation.
The fixed cost of a distillation column at minimum reflux ratio is
Lewis number, which is important in problems involving simultaneous heat and mass transfer, is the ratio of
The solvent used in liquid-liquid extraction should have __________ less than one.
Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre.
Dryer widely used in a textile industry is __________ dryer.
Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate.
The operating line for an absorber is curved, when plotted in terms of
Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ coloumn.
The reflux to a distillation column is 100 moles/hr, when the overhead product rate is 50 moles/hr. The reflux ratio is
With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________ , if the conduction and radiation through the solid are negligible.
A binary mixture of benzene and cyclohexane is separated by
Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays (N) of the absorber is, N+2 = 6 log (yin/yout).For 98% recovery of acetone, the number of trays required is/are
Which of the following increases during evaporative cooling process with recirculated water supply ?
For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns).
Corresponding to Nusselt number in heat transfer, the dimensionless group in mass transfer is the __________ number.
Equilibrium-moisture curves of different solids

View All Questions on: Mass Transfer

Management and Accounting

Human Resource Management Marketing and Marketing Management Financial Management and Financial Markets Cost Accounting Business Statistics