Question

Boiling refers to a change from the

a.

Solid to a liquid phase

b.

Vapor to a liquid phase

c.

Liquid to a solid phase

d.

Liquid to a vapor phase

Answer: (d).Liquid to a vapor phase

Interact with the Community - Share Your Thoughts

Uncertain About the Answer? Seek Clarification Here.

Understand the Explanation? Include it Here.

Q. Boiling refers to a change from the

Similar Questions

Explore Relevant Multiple Choice Questions (MCQs)

Q. The boiling process has wide-spread applications in

(i) Production of steam in nuclear and steam power plants for generation and for industrial processes and space heating
(ii) Absorption of heat in refrigeration and air-conditioning systems
(iii) Concentration, dehydration and drying of foods and materials

Identify the correct statements

Q. Maximum heat transfer rate in a modern boiler is about

Q. Which type of boiling occurs in steam boilers employing natural convection?

Q. In which type of boiling the fluid motion is induced by external means?

Q. The temperature of the liquid is below the saturation temperature and boiling takes place only in vicinity of the heated surface. This type of boiling is known as

Q. In which type of boiling the temperature of the liquid exceeds the saturation temperature?

Q. The phenomenon of stable film boiling is referred to as

Q. For water evaporating at atmospheric pressure, the burnout occurs at temperature excess slightly above

Q. The boiling phenomenon is known to occur in how many forms?

Q. When evaporation takes place at the liquid-vapor interface, the heat transfer is solely due to free convection and the film coefficient follows the relation

Q. Fritz criterion is given by

Q. A 0.10 cm diameter and 15 cm long wire has been laid horizontally and submerged in water at atmospheric pressure. The wire has a steady state voltage drop of 14.5 V and a current of 42.5 A. Determine the heat flux of the wire.
The following equation applies for water boiling on a horizontal submerged surface

H = 1.54 (Q/A)^0.75 = 5.58 (d t)³ W/m² K

where Q/A is the heat flux rate in W/m² and d t is the temperature difference between surface and saturation.

Q. Natural convection heat transfer coefficients over surface of a vertical pipe and a vertical flat plate for same height. What is/are the possible reasons for this?

(i) Same height
(ii) Both vertical
(iii) Same fluid
(iv) Same fluid flow pattern

Select the correct answer

Q. The heat flux in nucleate boiling varies in accordance with

Q. In nucleate pool boiling, the heat flux depends on

Q. Identify the wrong statement with respect to boiling heat transfer?

Q. Estimate the peak heat flux for water boiling at normal atmospheric pressure. The relevant thermo-physical properties are

p f (liquid) = 958.45 kg/m³
p g (vapor) = 0.61 kg/m³
h f g = 2.25 * 10⁶ J/kg
σ = 0.0585 N/m

Q. A 1.0 mm diameter and 300 mm long nickel wire is submerged horizontal in water at atmospheric pressure. At burnout, the wire has a current of 195 A. Calculate the voltage at burnout. The relevant thermos-physical properties are

p f (fluid) = 959.52 kg/m³
p g (vapor) = 0.597 kg/m³
h f g = 2257000 J/kg
σ = 0.0533 N/m

Q. Condensation refers to a change from the

Q. Condensation process is very common in

(i) Boilers
(ii) Condensers
(iii) Evaporators

Identify the correct statements

Recommended Subjects

Are you eager to expand your knowledge beyond Heat Transfer? We've handpicked a range of related categories that you might find intriguing.

Click on the categories below to discover a wealth of MCQs and enrich your understanding of various subjects. Happy exploring!