Q. Drawframes equipped with intersecting rotating disks used in pre spinning stages are

View solution

Q. In case of short fibers, control must be adjusted in a way to get

View solution

Q. In order to check fibers without causing any eventual problems, different points of teeth of controller must operate at speed

View solution

Q. When memory speed increases, feeler accuracy

View solution

Q. Diameter of Herrison's cylinder reduces the

View solution

Q. Width of intersecting rotating disks coated with teeth having one head per machine is calculated to be

View solution

Q. Maximum feeding speed allows proper operating mode of

View solution

Q. Mechanical memory disk of mechanical draft autoleveller stays in constant rotation with help of

View solution

Q. Movable roller of vertical axes pulley is pressed against fixed roller with a force of

View solution

Q. Mechanical memory disks stores

View solution

Q. Controllers per head in intersecting rotating disks are

View solution

Q. Slivers per head in Herrison-small barrel cylinders are

View solution

Q. Above spikes of Herrison's cylinder, fibers

View solution

Q. Thickness with Herrison needle roller in Herrison- small barrel cylinder is

View solution

Q. Mechanical autoleveller has a feeler at

View solution

Q. In drawing process, memory speed sets the

View solution

Q. Slivers per can in Herrison-small barrel cylinders are

View solution

Q. Four sliver processed by four head drawframe are collected in

View solution

Q. In intersecting rotating disks, sliver per can in four cans are

View solution

Q. In draw frame with draft control by means of elastic nip roller, elastic control is essentially based on

View solution