Q. What is earthing?

View solution

Q. What is an earth electrode?

View solution

Q. Earth electrode provides ____________

View solution

Q. How is the condition of an earth electrode measured?

View solution

Q. In a three phase system, the neutral is _________

View solution

Q. Earthing is used as return conductor in telephone lines and for traction work.

View solution

Q. Earthing does not help in protecting the equipment.

View solution

Q. After earthing, the different parts of an electrical machinery are at _________

View solution

Q. Connection of the various parts of a circuit to earth has a _________

View solution

Q. Specific resistance of soil is _________

View solution

Q. The readings of polar type potentiometer are I = 12.4∠27.5°, V = 31.5∠38.4°. Then, reactance of the coil will be ________

View solution

Q. The voltage drop across a standard resistor of 0.2 Ω is balanced at 83 cm. Find the magnitude of the current, if the standard cell emf of 1.53 V is balanced at 42 m.

View solution

Q. Low resistance is measured by ___________

View solution

Q. The resistance can be measured most accurately by _________

View solution

Q. A slide wire potentiometer has 10 wires of 2 m each. With the help of a standard voltage source of 1.045 V, it is standardized by keeping the jockey at 104.5 cm. If the resistance of potentiometer wires is 2000 Ω, then the value of working current is?

View solution

Q. Which of the following method is used for the measurement of Medium Resistance?

View solution

Q. A resistor of 10 kΩ with the tolerance of 5% is connected in parallel with 5 kΩ resistors of 10% tolerance. What is the tolerance limit for a parallel network?

View solution

Q. A 0-400V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by this instrument is 250 V. Calculate the limiting error in percentage.

View solution

Q. The current flowing in a resistor of 1Ω is measured to be 25 A. But it was discovered that ammeter reading was low by 1% and resistance was marked high by 0.5%. Find true power as a percentage of the original power.

View solution

Q. A resistor of 10 kΩ with the tolerance of 5% is connected in series with 5 kΩ resistors of 10% tolerance. What is the tolerance limit for a series network?

View solution