Q. Two watt-meters, which are connected to measure the total power on a three-phase system supplying a balanced load, read 20.5 kW and -3.5 kW respectively. The total power is?

View solution

Q. A coil (which can be modelled as a series RL circuit) has been designed for high Q performance. The voltage is rated at and a specified frequency. If the frequency of operation is increased 10 times and the coil is operated at the same rated voltage. The new value of Q factor and the active power P will be?

View solution

Q. In the measurement of 3-phase power by 2 watt-meter method, if the 2 watt-meter readings are equal, the power factor of the circuit is?

View solution

Q. The meter constant of a single-phase, 230 V induction watt-meter is 600 rev/kW-h. The speed of the meter disc for a current of 15 A at 0.8 power factor lagging will be?

View solution

Q. Choose the correct statement regarding two watt-meter method for power measurements in 3-phase circuit.

View solution

Q. The ratio of the reading of 2 watt-meters connected to measure power in a balanced 3-phase load is 2: 1 and the load is inductive. The power factor of load is?

View solution

Q. The two-wattmeter method is used to measure active power. The system is a 3-phase, 3- wire system. Then, the power reading is?

View solution

Q. A single-phase load is connected between R and Y terminals of a 220 V, symmetrical, 3-phase, 4 wire systems with phase sequence RYB. A watt-meter is connected in the system. The watt-meter will read (pf = 0.8 lagging)?

View solution

Q. Power flowing in 3-phase, 3-wire system is measured by two wattmeter whose readings are 7000 W and -2500 W. If the voltage of the circuit is 400 V, then what will be the value of capacitance introduced in each phase to make one wattmeter reads zero? The frequency is 50 Hz.

View solution

Q. Two watt meters, which are connected to measure the total power on a three-phase system supplying a balanced load, read 10.5 kW and – 2.5 kW respectively. What is the total power?

View solution

Q. In the Two wattmeter method of measuring power in a balanced three-phase circuit, one wattmeter shows zero and the other positive maximum. The load power factor is?

View solution

Q. Disc rotation is determined by ________

View solution

Q. Eddy e.m.f produces a torque.

View solution

Q. Excitation of the three coils produces ________

View solution

Q. The three coils are ________

View solution

Q. A rotating phase sequence indicator consists of ________

View solution

Q. How many types of phase sequence indicators are there?

View solution

Q. Synchronization of A.C. supply means __________

View solution

Q. Phase sequence indicator gives the maximum value of phase voltages.

View solution

Q. Full load u.p.f adjustment involves _________

View solution