Q. Digital transmission is more likely to be affected by modal noise.

View solution

Q. A multimode step index fiber has source of RMS spectral width of 60 nm and dispersion parameter for fiber is 150 psnm⁻¹km⁻¹. Estimate rms pulse broadening due to material dispersion.

View solution

Q. A multimode fiber has RMS pulse broadening per km of 12 ns/km and 28 ns/km due to material dispersion and intermodal dispersion resp. Find the total RMS pulse broadening.

View solution

Q. Γg = dβ / C*dk. What is β in the given equation?

View solution

Q. Most of the power in an optical fiber is transmitted in fiber cladding.

View solution

Q. A single mode fiber has a zero dispersion wavelength of 1.21 μm and a dispersion slope of 0.08 psnm⁻²km⁻¹. What is the total first order dispersion at wavelength 1.26 μm.

View solution

Q. The dispersion due to material, waveguide and profile are -2.8 nm⁻¹km⁻¹, 20.1 nm⁻¹km⁻¹ and 23.2 nm⁻¹km⁻¹respectively. Find the total first order dispersion?

View solution

Q. Dispersion-shifted single mode fibers are created by __________

View solution

Q. An alternative modification of the dispersion characteristics of single mode fibers involves achievement of low dispersion gap over the low-loss wavelength region between __________

View solution

Q. The fibers which relax the spectral requirements for optical sources and allow flexible wavelength division multiplying are known as __________

View solution

Q. For suitable power confinement of fundamental mode, the normalized frequency v should be maintained in the range 1.5 to 2.4 μm and the fractional index difference must be linearly increased as a square function while the core diameter is linearly reduced to keep v constant. This confinement is achieved by?

View solution

Q. Any amount of stress occurring at the core-cladding interface would be reduced by grading the material composition.

View solution

Q. The variant of non-zero-dispersion-shifted fiber is called as __________

View solution

Q. Non-zero-dispersion-shifted fiber was introduced in the year 2000.

View solution

Q. For many applications that involve optical fiber transmission, an intensity modulation optical source is not required.

View solution

Q. The optical source used for detection of optical signal is ____________

View solution

Q. An optical fiber behaves as a birefringence medium due to differences in ___________

View solution

Q. The beat length in a single mode optical fiber is 8 cm when light from a laser with a peak wavelength 0.6 μm is launched into it. Estimate the modal birefringence.

View solution

Q. Beat length of a single mode optical fiber is 0.6 cm. Calculate the difference between propagation constants for the orthogonal modes.

View solution

Q. A polarization maintaining fiber operates at a wavelength 1.2 μm and have a modal birefringence of 1.8*10⁻³. Calculate the period of perturbation.

View solution