Q. The optical feedback technique is useful at low transmission rates.

View solution

Q. How many types of optical amplifier technologies are available.

View solution

Q. The optimum filter bandwidth is typically in the range ________________

View solution

Q. For linear as well as in nonlinear mode _______________ are most important network elements.

View solution

Q. The more advantages optical amplifier is ____________

View solution

Q. ________________ cannot be used for wideband amplification.

View solution

Q. ____________ is used preferably for channel selection in a WDM system.

View solution

Q. For used in single-mode fiber __________ are used preferably.

View solution

Q. Mostly ____________ are used in nonlinear applications.

View solution

Q. _______________ is superior as compared to _________________

View solution

Q. ______________ are operated at current beyond normal lasing threshold current, practically.

View solution

Q. An uncoated FPA has peak gain wavelength 1.8 μm, mode spacing of 0.8 nm, and long active region of 300 v. Determine RI of active medium.

View solution

Q. Determine the peak gain wavelength of uncoated FPA having mode spacing of 2 nm, and 250 μm long active region and R.I of 3.78.

View solution

Q. An SOA has net gain coefficient of 300, at a gain of 30 dB. Determine length of SOA.

View solution

Q. An SOA has length of 35.43×10⁻³ m, at 30 dB gain. Determine net gain coefficient.

View solution

Q. An SOA has mode number of 2.6, spontaneous emission factor of 4, optical bandwidth of 1 THz. Determine noise power spectral density.

View solution

Q. An SOA has noise power spectral density of 1.18 mW, spontaneous emission factor of 4, optical bandwidth of 1.5 THz. Determine mode number.

View solution

Q. The spectral dependence on gain is always constant.

View solution

Q. ESA ________ the pumping efficiency of device.

View solution

Q. Signal amplification is obtained in ____________

View solution