Q. In an unmatched line the actual signal on the line is ___________

View solution

Q. What is the Standing wave ratio if a 75 Ω antenna load is connected to a 50 Ω transmission line?

View solution

Q. The ratio of the incident voltage wave Vᵢ to the reflected voltage wave Vᵣ is called the reflection coefficient.

View solution

Q. What is the reflection coefficient If a line is terminated in its characteristic impedance?

View solution

Q. What percentage of power is reflected if the reflection coefficient is 0.5?

View solution

Q. What is the resistive load if SWR= 3.05 and Z₀ =75 Ω?

View solution

Q. How does a shorted transmission line appear to a generator whose length is a quarter of the wavelength?

View solution

Q. How does a shorted transmission line appear to a generator whose length is a half of the wavelength?

View solution

Q. When a shorted line does looks like a series resonant circuit to the generator?

View solution

Q. When does a shorted transmission line look like an inductor to the generator?

View solution

Q. The characteristics of an open transmission line are just the opposite of shorted transmission line with respect to what the generator sees.

View solution

Q. When does an open transmission line look like an inductor to the generator?

View solution

Q. The impedance of a line is zero when ___________

View solution

Q. The special transmission lines constructed on PCBs to act as tuned circuits is called as?

View solution

Q. Which of the following is not true with respect to microstrip?

View solution

Q. What is the characteristic impedance of microstrip with the dimensions h = 0.0625 in, w = 0.1 in, t = 0.003 in, and ε= 4.5?

View solution

Q. What is the transmission line in which a flat conductor is sandwiched between two ground planes?

View solution

Q. Microstrip and striplines can be made by using monolithic, thin-film, and hybrid IC techniques to produce ________

View solution

Q. A microstrip transmission line is to be used as a capacitor of 4 pF at 800 MHz. The PCB dielectric is 3.6. The microstrip dimensions are h = 0.0625 in, w = 0.13 in, and t = 0.002 in. What is the characteristic impedance of the line?

View solution