Q. The final operation of finishing the concrete surface is called _____________

View solution

Q. The process of removing the irregularities from the surface of concrete left after screeding is called floating.

View solution

Q. The process of hardening the concrete mixes by keeping its surface moist for a certain period is called ____________

View solution

Q. After the curing of 28 days, the concrete gains strength upto _____________

View solution

Q. The construction joints in cement concrete ___________

View solution

Q. For compacting large sections of mass concrete in structures, the type of vibrator used is ________________

View solution

Q. What is flexural strength?

View solution

Q. What is equivalent flexural load?

View solution

Q. What is equivalent flexural strength?

View solution

Q. What is equivalent flexural strength ratio?

View solution

Q. Calipers, capable of reading the dimensions of test specimens to an accuracy of ____________

View solution

Q. Rule (ruler/scale), capable of reading the dimensions of test specimens to an accuracy of ________

View solution

Q. Load measuring device shall be capable of measuring loads to an accuracy of ___________

View solution

Q. The tolerances on the cross-section of the test specimens shall be within ± ____________

View solution

Q. The flexural strength (or modulus of rupture) is obtained for the first peak load, Pmax as _______________

View solution

Q. A data acquisition system capable of digitally recording and storing load and deflection data at least ___________

View solution

Q. Ring test is the determination for ___________

View solution

Q. Ring test is not the determination for ______________

View solution

Q. Most small and common ___________ load capacity machines will work for the loads of the materials tested to this specification.

View solution

Q. Begin the test by separating the grips at a speed of _______________

View solution