Q. SCC has __________ yield stress.

View solution

Q. A ___________ paste structure undergoes ___________ creep.

View solution

Q. After finishing concrete surface must be kept __________

View solution

Q. In a dry environment, concrete strength will be loosed as much as __________ % in moist environment.

View solution

Q. The loss in weight should not exceed ______ percent when tested with sodium sulphate and ______ percent with magnesium sulphate solution.

View solution

Q. On cooling below 1250ºC, C₃S decomposes ______

View solution

Q. In the soundness test a specimen of hardened cement paste is _______ for a fixed time.

View solution

Q. Compressive strength of hardened concrete is done by _______

View solution

Q. Which test can be performed without skilled labor?

View solution

Q. Identify the type of destructive testing.

View solution

Q. Maximum nominal size of aggregates to be used in concrete may be as large as possible within the limits prescribed by _______

View solution

Q. ________ has designated the concrete mixes into a number of grades as M10, M15.

View solution

Q. _______ cement content to avoid shrinkage cracking due to temperature cycle in mass concrete.

View solution

Q. ___________ water-cement ratio content to give adequate durability for the particular site conditions.

View solution

Q. The adequate workability necessary for ___________ compaction with the compacting equipment available.

View solution

Q. The __________ compressive strength required from structural consideration.

View solution

Q. The exposure of conventional mixing in open bowl is about ___________ ppm in the breathing zone.

View solution

Q. Vacuum mixing systems reduce the exposure by _________ %.

View solution

Q. After vacuum mixing, the volumetric shrinkage can be raised from 3–5% to __________ % in different cements.

View solution

Q. Cement has ________ % volumetric shrinkage after curing.

View solution