Q. The friction in the nozzle __________ exit velocity of steam.

View solution

Q. In a reaction turbine

View solution

Q. A stage, in reaction turbine, is represented by

View solution

Q. A single stage turbine is not used because it requires large reduction gearing due to very high rotational speed.

View solution

Q. In turbines, the fluid undergoes a continuous steady flow process and the speed of flow is

View solution

Q. A nozzle is said to be a convergent-divergent nozzle, when the cross-section of a nozzle first decreases from its entrance to throat and then increases from its throat to exit.

View solution

Q. In an impulse reaction turbine, the pressure drops gradually and continuously over

View solution

Q. When the inlet pressure of steam is equal to the exit pressure, then

View solution

Q. In velocity compounding of an impulse turbine, the expansion of steam takes place in a nozzle or a set of nozzles from the boiler pressure to condenser pressure.

View solution

Q. The critical pressure ratio is given by (where p1 = Initial pressure of steam, and p2 = Pressure of steam at throat or critical pressure)

View solution

Q. A steam turbine, in which a part of the steam after partial expansion, is used for process heating and the remaining steam is further expanded for power generation, is known as

View solution

Q. The stage efficiency is the ratio of energy supplied to the blades per kg of steam to the total energy supplied per stage per kg of steam.

View solution

Q. Stage efficiency is also known as

View solution

Q. Degree of reaction is defined as the ratio of

View solution

Q. The expansion of steam in a nozzle follows

View solution

Q. The blade friction in the impulse turbine reduces the velocity of steam by __________ while it passes over the blades.

View solution

Q. The effect of bleeding is that

View solution

Q. The expansion of steam, as it flows over the blades in reaction turbine, represents

View solution

Q. The critical pressure ratio for initially superheated steam is __________ as compared to initially dry saturated steam.

View solution

Q. For a Parson's reaction turbine, if α1 and α2 are fixed blade angles at inlet and exit respectively and β1 and β2 are the moving blade angles at entrance and exit respectively, then

View solution