Q. The lengths of the standard crossings in India for Broad gauge and Metre gauge tracks is same for

View solution

Q. If w is width of sleepers, s is sleeper spacing and d is depth of ballast then

View solution

Q. On Indian Railways, the approximate weight of a rail section is determined from the formula

View solution

Q. If D is distance between centres of two parallel tracks of gauge G with entire curved leads and equal angles of crossing, total length of crossover, is

View solution

Q. If the standard length of a crossing is 480 cm, the number of crossing is

View solution

Q. If S is the switch angle and α is diamond angle, r is the radius of slip, the distance between middle point slip and the nose of obtuse crossing, is

View solution

Q. Wooden sleepers used on the girders of bridges, are generally made of

View solution

Q. If a 0.7% upgrade meets a 0.65% downgrade at a summit and the permissible rate of change of grade per chain length is 0.10%, the length of the vertical curve, is

View solution

Q. Overall depth of a dog spike, is

View solution

Q. Pot sleepers are in the form of

View solution

Q. In railways a triangle is mainly provided for

View solution

Q. A kink is made in stock rails, ahead of the toe of switch at a distance of

View solution

Q. Rails are bent to correct curvature if the degree of curve, is more than

View solution

Q. The first Indian railway was laid in

View solution

Q. The weight of the rails depends upon

View solution

Q. Pick up the correct statement from the following :

View solution

Q. Pick up the incorrect statement from the following:

View solution

Q. Minimum depth of ballast prescribed of B.G. trunk lines of Indian Railways, is

View solution

Q. Pick up the incorrect statement from the following:

View solution

Q. If α is switch angle and R is radius of the turnout, the length of the tongue rail, is

View solution