Question
a.
correctly focussed
b.
not correctly focussed
c.
said to have parallax
d.
free from parallax.
Posted under Civil Engineering
Interact with the Community - Share Your Thoughts
Uncertain About the Answer? Seek Clarification Here.
Understand the Explanation? Include it Here.
Q. While viewing through a level telescope and moving the eye slightly, a relative movement occurs between the image of the levelling staff and the cross hairs. The instrument is
Similar Questions
Explore Relevant Multiple Choice Questions (MCQs)
Q. In chain surveying field work is limited to
View solution
Q. Two concave lenses of 60 cm focal length are cemented on either side of a convex lens of 15 cm focal length. The focal length of the combination is
View solution
Q. One of the tacheometric constants is additive, the other constant, is
View solution
Q. The limiting length of an offset does not depend upon
View solution
Q. The most reliable method of plotting a theodolite traverse, is
View solution
Q. The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to
View solution
Q. Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to
View solution
Q. The bearings of the lines AB and BC are 146° 30' and 68° 30'. The included angle ABC is
View solution
Q. For a closed traverse the omitted measurements may be calculated
View solution
Q. The slope correction for a length of 30 m along a gradient of 1 in 20, is
View solution
Q. The main principle of surveying is to work
View solution
Q. For the construction of highway (or railway)
View solution
Q. If the radius of a simple curve is R, the length of the chord for calculating offsets by the method of chords produced, should not exceed.
View solution
Q. The sensitiveness of a level tube decreases if
View solution
Q. For true difference in elevations between two points A and B, the level must be set up
View solution
Q. ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is
View solution
Q. Keeping the instrument height as 1.5 m, length of staff 4 m, the slope of the ground as 1 in 10, the sight on the down-slope, must be less than
View solution
Q. Pick up the correct statement from the following :
View solution
Q. The radius of curvature of the arc of the bubble tube is generally kept
View solution
Q. If S is the length of a subchord and R is the radius of simple curve, the angle of deflection between its tangent and sub-chord, in minutes, is equal to
View solution
Recommended Subjects
Are you eager to expand your knowledge beyond Civil Engineering? We've handpicked a range of related categories that you might find intriguing.
Click on the categories below to discover a wealth of MCQs and enrich your understanding of various subjects. Happy exploring!
