Q. The maximum net pressure intensity causing shear failure of soil, is known

View solution

Q. The factor which affects the compaction, is

View solution

Q. The compression resulting from a long term static load and consequent escape of pore water, is known as

View solution

Q. Soil classification of composite soils, exclusively based on the particle size distribution, is known

View solution

Q. The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated

View solution

Q. The specific gravity of quartz, is

View solution

Q. If the cohesive force, (c), is 1.5 t/m², the density (γ) of the soil is 2.0 t/m³, factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of the §lope, is

View solution

Q. Pick up the correct statement from the following:

View solution

Q. Through a point in a loaded soil, the principal stress is maximum on

View solution

Q. Maximum size of clay particles, is :

View solution

Q. The capillary rise of water

View solution

Q. Coulomb's wedge theory assumes that

View solution

Q. If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is

View solution

Q. Pick up the correct statement from the following:

View solution

Q. The passive earth pressure of a soil, is proportional to (where φ is the angle of internal friction of the soil.)

View solution

Q. If a soil undergoes a change in shape and volume by application of external loads over it, but recovers its shape and volume immediately after removal of the load, the property of the soil is said to be

View solution

Q. If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is

View solution

Q. The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m² to 50 tonnes/m², the coefficient of compressibility is

View solution

Q. The minimum centre to centre distance of friction piles of 1 m diameter, is

View solution

Q. Over-consolidation of soils is caused due to

View solution