Q. In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or

View solution

Q. A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is

View solution

Q. If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by

View solution

Q. An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is

View solution

Q. If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a

View solution

Q. An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm φ placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is

View solution

Q. According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than

View solution

Q. Pick up the true statement from the following:

View solution

Q. A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is

View solution

Q. A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be

View solution

Q. Distribution of shear intensity over a rectangular section of a beam, follows :

View solution

Q. [A + (m - 1)ASC] known as equivalent concrete area of R.C.C. is given by

View solution

Q. Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam

View solution

Q. The maximum diameter of a bar used in a ribbed slab, is

View solution

Q. Distribution reinforcement in a simply supported slab, is provided to distribute

View solution

Q. To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is

View solution

Q. The thickness of the topping of a ribbed slab, varies between

View solution

Q. To ensure uniform pressure distribution, the thickness of the foundation, is

View solution

Q. The maximum ratio of span to depth of a cantilever slab, is

View solution

Q. The horizontal portion of a step in a stairs case, is known as

View solution