Q. Two 2 port circuits are connected cascaded. To determine the response, it is more convenient to use

View solution

Q. For addition and subtraction operations, phasors

View solution

Q. If VA = - 10 V and VB = - 15 V, VAB = 5 V.

View solution

Q. Assertion (A): Tie set schedule is used in nodal analysis.

Reason (R): Loop currents are fictitious quantities.

View solution

Q. When a lead acid cell discharges, the specific gravity of electrolyte increases.

View solution

Q. For a high pass filter, β = π in attenuation band.

View solution

Q. A minimum function has

View solution

Q. A source of angular frequency 1 rad sec has a source impedance consisting of 1 Ω resistance in series with 1 H inductance. The load that will obtained the maximum power transfer is

View solution

Q. When tracing through a resistance we always get a voltage drop.

View solution

Q. A copper coil has a resistance of 40 ohm at 20°C. At 100°C the resistance is likely to be

View solution

Q. Assertion (A): In a parallel circuit with three branches having R, L and C respectively and fed by a step current I, the current through inductance is always zero.

Reason (R): The time constant of R-L circuit is L/R.

View solution

Q. When a source is delivering maximum power to a load through a network, the ratio of power delivered to the source power

View solution

Q. A two branch parallel tuned circuit has a coil of resistance 100 Ω and inductance 0.005 H in one branch and 10 nF capacitor in the second branch. At resonance frequency, the dynamic resistance is

View solution

Q. If each branch of a Delta circuit has impedance √3 Z then each branch of the equivalent Y circuit has impedance.

View solution

Q. An RLC series circuit has R = 1 Ω, L = 1 H, C = 1 F. The damping ratio is

View solution

Q. In a purely capacitive circuit, the current __________ the voltage by __________ .

View solution

Q. A circuit has two branches in parallel and each branch has only one element. The applied voltage and source current are v = 200 sin (200t + 30°) and i = 50 sin (200t + 50°). If one branch has capacitor, the other branch contains

View solution

Q. If B = 4 + j3, (B)^1/3 =

View solution

Q. The equivalent unit of joule is

View solution

Q. Two coils are connected in parallel. Their fluxes are adding. If the connections of one of the coils are reversed, the total inductance of the arrangement

View solution