Q. If G(s) H(s) = 1/(s²+100), the closed loop poles are on

View solution

Q. A system has 12 poles and 2 zeros. Its high frequency asymptote in its magnitude plot has a slope of

View solution

Q. The open loop transfer function of a unity feedback system is G(s) = 1/(s+2)². The poles of closed loop system are at

View solution

Q. If G(jω) = 1/(1+(jωT) the polar plot, as the frequency is varied from 0 to infinity is

View solution

Q. Lag compensation increases bandwidth of the system.

View solution

Q. The effect of negative feedback on distortion and bandwidth because

View solution

Q. Which of the following rotors are used in two phase ac servomotor?

1. Solid iron rotor
2. Squirrel cage rotor
3. Drag cup rotor

Of the above the correct ones are

View solution

Q. In a second order system with a unit step input, the speed of response is high if system is

View solution

Q. A thermometer requires 1 minute to indicate 98% of its final response to a step input. If it is a first order system the time constant is

View solution

Q. Assertion (A): A slight change in pole-zero configuration can cause only minor changes in root locus configuration.

Reason (R): Asymptotes show the behaviour of root loci for |s| >> 1

View solution

Q. In a second order system ωn = 10 rad/sec and ζ = 0.1, then ωd =

View solution

Q. In a second order undamped system, the poles are on

View solution

Q. An open loop system has a forward path transfer function (42.25)/s(s + 6.5). The unit step response of the system starting from rest will have its maximum value at a time equal to

View solution

Q. Which of the following is not a necessary advantage of negative feedback system?

View solution

Q. In position control system the device used for providing rate feedback voltage is

View solution

Q. Derivative control action is effective?

View solution

Q. The phase angle curve of G(jω) H(jω) can be drawn

View solution

Q. The most commonly used devices for differencing and amplification, in control systems, are

View solution

Q. In Bode method of stability analysis, the error curve is not symmetric about corner frequency.

View solution

Q. Modelling error may occur due to

View solution