Q. Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant.

View solution

Q. Sides of equilateral-triangular co-ordinates (on which ternary liquid system is plotted) represent

View solution

Q. In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when

View solution

Q. In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be

View solution

Q. As the reflux ratio decreases, the

View solution

Q. Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is

View solution

Q. __________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid.

View solution

Q. Rate of leaching increases with increasing

View solution

Q. An azeotropic mixture is a __________ mixture.

View solution

Q. Pick out the wrong statement.

View solution

Q. Molecular seives are regenerated by heating to __________ °C.

View solution

Q. In a counter-current extractor, as the axial mixing increases, the extraction efficiency

View solution

Q. Heat sensitive materials like certain pharmaceuticals and food stuffs can be dried in a/an __________ dryer.

View solution

Q. In extractive distillation, solvent is

View solution

Q. Which of these columns incurs the lowest pressure drop ?

View solution

Q. In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase.

View solution

Q. If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is

View solution

Q. Which of the following remains constant during evaporative cooling process with recirculated water supply ?

View solution

Q. For stripping of a gas in a counter current stripper, the operating line

View solution

Q. Diameter of raschig rings used in packed tower in industry is normally around __________ inches.

View solution