Q. When incomplete combustion loss is high, the flue gas analysis shows large amount of

View solution

Q. The gas which contributes maximum to the heating value of natural gas is

View solution

Q. The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C.

View solution

Q. Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm³ /ton of dry coal.

View solution

Q. Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the

View solution

Q. Pick out the wrong statement.

View solution

Q. Stack heat losses can be minimised by

View solution

Q. Laboratory gas is obtained by the cracking of

View solution

Q. Bituminous coal

View solution

Q. Ratio of primary air to secondary air increases with increase in the rank of coal, because the

View solution

Q. Higher percentage of ash in coal meant for the production of metallurgical grade coke

View solution

Q. Combustion of pulverised coal as compared to that of lump coal

View solution

Q. 'Wobbe index' is a characteristic of

View solution

Q. A coal with high ash content is undesirable, as

View solution

Q. Presence of free moisture in coal during its high temperature carbonisation

View solution

Q. Higher efficiency in the combustion of solid fuel can not be achieved by

View solution

Q. A coal containing very high percentage of durain is called __________ coal.

View solution

Q. During combustion of gaseous fuels, deficiency of air

View solution

Q. Gross and net calorific value of a fuel will be the same

View solution

Q. Low temperature carbonisation

View solution