Q. The calorific value of a gas of composition CO₂ = 20%, H₂ = 50%, CH₄ = 30%, is y. If the composition of gas is changed to H₂ = 50%, CH₄ = 30%, CO₂ = 10%, N₂ = 10%, then the calorifice value will be

View solution

Q. For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm³ ), while the C.V. is same on weight basis (i.e., kcal/kg) ?

View solution

Q. One kg of carbon for theoretically complete combustion requires __________ kg of air.

View solution

Q. If CO₂ is not fully absorbed by the KOH solution meant for its absorption in the orsat apparatus, it will appear as

View solution

Q. By-products are __________ recovered in 'Beehive ovens'.

View solution

Q. Which of the following fertilisers is produced in the by-products recovery (from coke oven gas) plant attached to an integrated steel plant ?

View solution

Q. Percentage of hydrogen in coke oven gas may be around

View solution

Q. Function of secondary air in pulverised coal firing is to

View solution

Q. Calorific value of dry wood may be around __________ Kcal/kg.

View solution

Q. Calorific value of gobar gas (containing CH₄ = 60% , H₂ = 10% ; CO₂ = 30%) may be about __________ Kcal/Nm³.

View solution

Q. When steam is passed over coal resulting in the endothermic reaction represent by, C + H₂O = CO + H₂, it is called the __________ of coal.

View solution

Q. Dry air requirement for burning 1 Nm³ of CO to CO₂ may be around __________ Nm³.

View solution

Q. Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced.

View solution

Q. Ammonia content in raw coke oven gas is about __________ gm/Nm³.

View solution

Q. Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximate analysis.

View solution

Q. Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases.

View solution

Q. Which of the following has the highest theoretical flame temperature ?

View solution

Q. Ultimate analysis of coal determines its __________ content.

View solution

Q. (64-132) rank coal (ASTM) means a coal with 64%

View solution

Q. High sulphur (4-6%) coal in India are found in

View solution