Q. Separation of isotopes is generally done using a/an __________ centrifuge.

View solution

Q. Temperature of the product during ultrafine grinding

View solution

Q. Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the screening of the

View solution

Q. Width and speed of a conveyor belt depends upon the __________ of the material.

View solution

Q. Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for

View solution

Q. Pick out the wrong statement.

View solution

Q. Which of the following size reduction equipments employs mainly attrition for ultrafine grinding ?

View solution

Q. Tank filter (e.g., Nutsch filter) is

View solution

Q. Which of the following gives the crushing energy required to create new surface ?

View solution

Q. In filtration, the use of 'filter aid' helps in

View solution

Q. Gizzlies are used for separating __________ solids.

View solution

Q. Which of the following clay mixing devices is vacuum operated for deairation of clay?

View solution

Q. Pick out the material having minimum Rittinger's number.

View solution

Q. __________ mills are termed as impactors.

View solution

Q. In case of a revolving mill, wet grinding compared to dry grinding

View solution

Q. To get a fine talc powder from its granules, the equipment used is

View solution

Q. For a cyclone of diameter 0.2 m with a tangential velocity of 15 m/s at the wall, the separation factor is

View solution

Q. At low Reynold's number, the power (P) required for agitating a fluid in a stirred tank becomes independent of inertial forces. In this limit, indicate which of the following relations is satisfied:

P₀ = ρ/ρN³ D⁵ : Power number
Re = ρ N D²/μ: Reynold's number

N is the impeller rotational speed, and D is the impeller diameter.

View solution

Q. Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines ?

View solution

Q. Rittinger's crushing law states that

View solution