Q. In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same.

View solution

Q. Exothermic reactions are best carried out in

View solution

Q. The rate of a gas phase reaction is given by K . Cᴀ . Cʙ. If the volume of the reaction vessel is reduced to 1/4th of its initial volume, then the reaction rate compared to the original rate will be __________ times.

View solution

Q. Rate of a chemical reaction is not affected by the

View solution

Q. Overall rate of reaction in a heterogenous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it does not entail a chain mechanism.

View solution

Q. __________ resistance is not involved in the combustion of a carbon particle.

View solution

Q. In an ideal P.F.R. at steady state conditions

View solution

Q. Space time in flow reactor is

View solution

Q. For a first order isothermal chemical reaction in a porous catalyst, the effectiveness factor is 0.3. The effectiveness factor will increase if the

View solution

Q. Cold shot cooling is only practical when the feed temperature is __________ than the reaction temperature.

View solution

Q. The preferred reacting system for oxidation of o-xylene to phthalic anhydride is

View solution

Q. In the hydrodealkylation of toluene to benzene, the following reactions occur:

C₇H₈ + H₂ → C₆H₆ + CH₄
2C₆H₆ ↔ C₁₂H₁₀ + H₂

Toluene and hydrogen are fed to a reactor in a molar ratio 1:5. 80% of the toluene gets converted and the selectivity of benzene(defined as moles of benzene formed/moles of toluene converted) is 90%. The fractional conversion of hydrogen is

View solution

Q. Catalyst is a substance, which __________ chemical reaction.

View solution

Q. A rise in temperature

View solution

Q. The enzyme which can catalyse the conversion of glucose to ethyl alcohol is

View solution

Q. The conversion for a first order liquid phase reaction. A → B in a CSTR is 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be

View solution

Q. What is the dispersion number for a CSTR?

View solution

Q. Rate of a chemical reaction is independent of the concentration of the reactants for a __________ reaction.

View solution

Q. With increase in temperature, the rate constant obeying Arhenious equation

View solution

Q. Bulk diffusion in catalyst pore __________ with increase in pressure.

View solution