E-PolyLearning

Discussion Forum

Que. Typical examples of heat conduction through cylindrical tubes are not found in
a. Power plants
b. Oil refineries
c. Most process industries
d. Aircrafts
Correct Answer:Aircrafts
Confused About the Answer? Ask fellow aspirants for Details Here
Already Know Explanation? Add it Here to help others.

More Questions Like this:

Shape factor for cylinder is
The temperatures on the two sides of a plane wall are t1 and t2 and thermal conductivity of the wall material is prescribed by the relation
K = k0 e^(-x/δ)

Where, k0 is constant and δ is the wall thickness. Find the relation for temperature distribution in the wall?
If we increase the thickness of insulation of a circular rod, heat loss to surrounding due to
The temperature distribution associated with radial conduction through a sphere is represented by
The value of critical radius in case of cylindrical hollow object is
A cylindrical cement tube of radii 0.05 cm and 1.0 cm has a wire embedded into it along its axis. To maintain a steady temperature difference of 120 degree Celsius between the inner and outer surfaces, a current of 5 ampere is made to flow in the wire. Find the amount of heat generated per meter length. Take resistance of wire equal to 0.1 ohm per cm of length
The following data pertains to a hollow cylinder and a hollow sphere made of same material and having the same temperature drop over the wall thickness

Inside radius = 0.1 m and outside surface area = 1 square meter

If the outside radius for both the geometrics is same, calculate the ratio of heat flow in the cylinder to that of sphere?
Chose the correct one with respect to critical radius of insulation
A spherical vessel of 0.5 m outside diameter is insulated with 0.2 m thickness of insulation of thermal conductivity 0.04 W/m degree. The surface temperature of the vessel is – 195 degree Celsius and outside air is at 10 degree Celsius. Determine heat flow per m² based on inside area
The oven of an electric store, of total outside surface area 2.9 m² dissipates electric energy at the rate of 600 W. The surrounding room air is at 20 degree Celsius and the surface coefficient of heat transfer between the room air and the surface of the oven is estimated to be 11.35 W/m² degree. Determine the average steady state temperature of the outside surface of the store
The thermal resistance for heat conduction through a hollow sphere of inner radius r1 and outer radius r2 is
A rod of 3 cm diameter and 20 cm length is maintained at 100 degree Celsius at one end and 10 degree Celsius at the other end. These temperature conditions are attained when there is heat flow rate of 6 W. If cylindrical surface of the rod is completely insulated, determine the thermal conductivity of the rod material
A pipe carrying steam at 215.75 degree Celsius enters a room and some heat is gained by surrounding at 27.95 degree Celsius. The major effect of heat loss to surroundings will be due to
In Cartesian coordinates the heat conduction equation is given by
“If β is less than zero, then with respect to the relation k = k0 (1 + β t), conductivity depends on surface area”. True or false
The accompanying sketch shows the schematic arrangement for measuring the thermal conductivity by the guarded hot plate method. Two similar 1 cm thick specimens receive heat from a 6.5 cm by 6.5 cm guard heater. When the power dissipation by the wattmeter was 15 W, the thermocouples inserted at the hot and cold surfaces indicated temperatures as 325 K and 300 K. What is the thermal conductivity of the test specimen material?
The rate of heat transfer for a plane wall of homogenous material with constant thermal conductivity is given by
If β is greater than zero, then choose the correct statement with respect to given relation
k = k0 (1 +β t)
Which is true regarding a complete rectangular furnace?
An electric cable of aluminum (k = 240 W/ m degree) is to be insulated with rubber (k = 6 W/ square meter degree). If the cable is in air (h = 6 W/square meter degree). Find the critical radius?

View All Questions on: Steady State Conduction

Management and Accounting

Human Resource Management Marketing and Marketing Management Financial Management and Financial Markets Cost Accounting Business Statistics