Q. When the Froude number is in the range of 2.5 to 4.5, the jump is ____________________

View solution

Q. Which of the following stilling basin is applicable to only rectangular cross-sections?

View solution

Q. The Froude number of a hydraulic jump is 5.5. The jump can be classified as ____________

View solution

Q. Standard stilling basin is provided at the toe of a dam spillway for energy dissipation is usually provided with auxiliary devices like chute blocks and dentated sills for the basic purpose of reducing the length of the stilling basin from about ________________

View solution

Q. In the case of dam spillways, the approaching Froude number usually lies in the range of __________

View solution

Q. _____________________ are suitable only for low spillways or weirs.

View solution

Q. Which of the following helps in dissipating the residual energy and to reduce the length of the jump or the basin?

View solution

Q. In a fixed roller of a spillway gate, the rollers are attached to the __________________

View solution

Q. In the vertical Stoney spillway gate, the rollers are placed between the ______________

View solution

Q. The spillway gate which when lowered cannot be seen from a distance is of the type ______________________

View solution

Q. An ogee spillway of a concrete gravity dam having FRL of 328 m and MWL of 340 m is provided with vertical gates between piers erected on the spillway. The effective length of the spillway is 60 m. The discharge through the spillway when gates are opened up to the actual reservoir level of 331.0 m will be_____________

View solution

Q. The most common vertical lift gates in modern days is _________________

View solution

Q. The working of Reinold’s gate is automatic.

View solution

Q. Which of the following gate is also called flush boards?

View solution

Q. Which one of the following gate is not suitable for curved crests?

View solution

Q. Which of the following gate works on the principle of counterweights against the water pressure?

View solution

Q. ________________ are used only for very minor works.

View solution

Q. Which of the following gate is not suitable for smaller spillways?

View solution