Q. “Transmissivity can also be defined as ratio of transmitted radiation to that of incident energy flow”. True or false

View solution

Q. A cavity with a small hole will always behave as a

View solution

Q. What is the wavelength band of gamma rays?

View solution

Q. Transmissivity is defined as

View solution

Q. A polished metal pipe 5 cm outside diameter and 370 K temperature at the outer surface is exposed to ambient conditions at 295 K temperature. The emissivity of the surface is 0.2 and the convection coefficient of heat transfer is 11.35 W/m² degree. Calculate the overall coefficient of heat transfer by the combined mode of convection and radiation

View solution

Q. Radiant energy with an intensity of 800 W/m² strikes a flat plate normally. The absorptivity is thrice the reflectivity and twice the transmissivity. Determine the rate of transmission

View solution

Q. With respect to incident radiation, transmissivity varies with

View solution

Q. A body through which all the incident radiations passes, is called

View solution

Q. Reflectivity is defined as

View solution

Q. Of the radiant energy 350W/m² incident upon a surface 250W/m² is absorbed, 60W/m² is reflected and the remainder is transmitted through the surface. Workout the value for reflectivity for the surface material

View solution

Q. A thin metal plate of 4 cm diameter is suspended in atmospheric air whose temperature is 290 K. This plate attains a temperature of 295 K when one of its face receives radiant energy from a heat source at the rate of 2 W. If heat transfer coefficient on both surfaces of the plate is stated to be 87.5 W/m 2 K, workout the energy lost by reflection

View solution

Q. The value of reflectivity depends upon
(i) Body temperature

(ii) Wavelength of reflected radiation

(iii) Nature of surface of body

Identify the correct statement

View solution

Q. When a surface absorbs a certain fixed percentage of striking radiation the surface is called

View solution

Q. Which one is true regarding gases?

View solution

Q. Thin glass plate is an example of

View solution

Q. Radiant energy with an intensity of 800 W/m² strikes a flat plate normally. The absorptivity is thrice the reflectivity and twice the transmissivity. Determine the rate of reflection

View solution

Q. Which one is true for opaque body?

View solution

Q. Energy strikes a vertical hemispherical plate with an intensity of 640 W/m². The absorptivity is thrice the transmissivity and twice the reflectivity. Determine the rate of transmission

View solution

Q. The absorptivity of a surface depends upon

(i) Direction of reflected radiation
(ii) Temperature of the surface
(iii) Composition

Identify the correct statements

View solution

Q. What is the absorptivity of gray body?

View solution