Q. _________ is provided to reduce the kinetic energy of falling water in weir.

View solution

Q. Curtain walls are provided to increase ________

View solution

Q. Which of the following are also known as upstream and downstream piles?

View solution

Q. A circular shaft of diameter 30 mm is tested under torsion the gauge length of test specimen is 300 mm. A torque of 2kNm produces an angle twist of 1°. Calculate CJ.

View solution

Q. __________ has perfect control on river flow.

View solution

Q. When the gross length is more than 6 metres between the face of abutment it is called as ________

View solution

Q. The minimum straight approach provided on either side of bridge is ___________

View solution

Q. ________ should be taken below the deepest scour level.

View solution

Q. ___________ formula is used for calculating the depth of the foundation.

View solution

Q. _______ foundation is used when the depth of water is more.

View solution

Q. _____________ foundation is used when bed soil is soft.

View solution

Q. The intermediate support of a bridge superstructure is called as ___________

View solution

Q. ___________ piers are adopted for well foundations.

View solution

Q. _______ piers are used, when the height of pier is large as in case of viaducts, fly overs.

View solution

Q. The projection of the piers on the upstream side is known as ________

View solution

Q. The end support of a bridge is __________

View solution

Q. The projection of the pier on the downstream side is known as ________

View solution

Q. ____________ piers are suitable when foundations are of steel cylinder caisson type.

View solution

Q. A solid shaft of circular in section is subjected to torque which produces maximum shear stress in a shaft. Calculate the diameter of the shaft.

View solution

Q. When two dissimilar shafts are connected together, then the shaft is __________

View solution