Q. The total radiant energy leaving a surface per unit time per unit surface area is represented by

View solution

Q. Determine the radiant heat flux between two closely spaced, black parallel plates radiating only to each other if their temperatures are 850 K and 425 K. The plates have an area of 4 m²

View solution

Q. What is the value of grey body factor for concentric cylinders?

View solution

Q. The net rate at which the radiation leaves the surface is given by

View solution

Q. A ring (E = 0.85) of 8 cm inner and 16 cm outer diameter is placed in a horizontal plane. A small element (E = 0.7) of 1 cm² is placed concentrically 8 cm vertically below the center of the ring. The temperature of the ring is 800 K and that of small area is 400 K. Find the radiant heat gain by the small ring

View solution

Q. Two opposed, parallel, infinite planes are maintained at 420 K and 480 K. Calculate the net heat flux between these planes if one has an emissivity of 0.8 and other an emissivity of 0.7

View solution

Q. The total radiant energy incident upon a surface per unit time per unit area is known as

View solution

Q. Which one of the following is true for opaque non-black surface?

View solution

Q. A radiation shield should

View solution

Q. Radiation shield are used between the emitting surfaces such that

View solution

Q. Which of the following can be used as a radiating shield?

View solution

Q. Determine the net radiant heat exchange per m 2 area for two infinite parallel plates held at temperature of 800 K and 500 K. Take emissivity as 0.6 for the hot plate and 0.4 for the cold plate

View solution

Q. Two parallel square plates, each 4 m² area, are large compared to a gap of 5 mm separating them. One plate has a temperature of 800 K and surface emissivity of 0.6, while the other has a temperature of 300 K and surface emissivity of 0.9. Find the net energy exchange by radiations between the plates

View solution

Q. The furnace of a boiler is laid from fire clay brick with outside lagging from the plate steel, the distance between the two is quite small compared with the size of the furnace. The brick setting is at an average temperature of 365 K whilst the steel lagging is at 290 K. Calculate the radiant heat flux. Assume the following emissivity values

For brick = 0.85
For steel = 0.65

View solution

Q. Two black discs each of diameter 50 cm are placed parallel to each other concentrically at a distance of one meter. The discs are maintained at 1000 K and 500 K. Calculate the heat flow between the discs when no other surface is present

View solution

Q. Two black discs each of diameter 50 cm are placed parallel to each other concentrically at a distance of one meter. The discs are maintained at 1000 K and 500 K. Calculate the heat flow between the discs when the disks are connected by a cylindrical black no-flux surface

View solution

Q. A cavity in the shape of a frustum of a cone has diameter 30 cm and 60 cm and the height is 80 cm. If the cavity is maintained at temperature of 800 K, determine the heat loss from the cavity when the smaller diameter is at the bottom

View solution

Q. A conical cavity of base diameter 15 cm and height 20 cm has inside surface temperature 650 K. If emissivity of each surface is 0.85, determine the net radiative heat transfer from the cavity

View solution

Q. A cylindrical cavity of base diameter 15 cm and height 20 cm has inside surface temperature 650 K. If emissivity of each surface is 0.85, determine the net radiative heat transfer from the cavity

View solution

Q. What is the unit of coefficient of radiant heat transfer?

View solution