Q. The vertical stress is proportional to __________

View solution

Q. The vertical stress is proportional to __________The maximum value of σz on vertical line is obtained at the point of intersection of vertical plane with radial line at the angle of ____________The maximum value of σz on vertical line is ____________

View solution

Q. The maximum vertical stress is _______ when a concentrated load of 20 kN acts at a radial distance of 2m.

View solution

Q. When the maximum vertical stress is 0.111 kN/m² at a radial distance of 4m from the point load is __________ kN.

View solution

Q. What will be the intensity of vertical stress at a depth of 4m directly below the concentrated load of 20 kN?

View solution

Q. If r/z ratio is 0.5 and load of 20 kN is acting at a point, then the vertical pressure at a depth 6m is ____________

View solution

Q. If a load of 30 kN is acting on a point on the ground surface, then the intensity of vertical stress directly below the point on its axis of loading at a depth of 2m is given by __________

View solution

Q. The Boussinesq influence factor for r/z ratio equal to 0.3 is given by ____________

View solution

Q. When the ratio of r/z equals to 0.5, the Boussinesq influence factor is ________ of the maximum.

View solution

Q. When the maximum vertical stress \((σ_z)_{max}=\frac{0.0888Q}{r^2}\) at a point, the shear stress at that point is ____________

View solution

Q. For maximum vertical stress, the shear stress is _________ if the load is 20 kN and r=2m.

View solution

Q. When the ratio of r/z equals to 1, the Boussinesq influence factor is ________ of the maximum.

View solution

Q. When the ratio of r/z equals to 2, the Boussinesq influence factor is ________ of the maximum.

View solution

Q. For maximum vertical stress, the shear stress is _________ if the load is 30 kN and r=4m.

View solution

Q. What will be the intensity of shear stress at a depth of 4m and at a radial distance of 1m from concentrated load of 20 kN?

View solution

Q. If r/z ratio is 2 and load of 20 kN is acting at a point, then the vertical pressure at a depth 6m is ____________

View solution

Q. The Boussinesq influence factor for r/z ratio equal to 1 is given by ____________

View solution

Q. When the maximum vertical stress is 0.235 kN/m² at a radial distance of 4m from the point load is __________ kN.

View solution

Q. The Boussinesq’s vertical pressure σz under a uniformly loaded circular area is given by ________

View solution

Q. The Boussinesq influence factor for uniformly distributed circular area is given by ____________

View solution