Q. During whole bobbin formation process, steady control of balloon is achieved by synchronized motion between

View solution

Q. Roving feeding system greatly affects number of

View solution

Q. Best solution of diminish balloons is to use

View solution

Q. Difference between spindle rpm and traveler rpm in given time gives the

View solution

Q. Rotational speed of traveler is less than spindle due to

View solution

Q. Single control ring spinning frame consists of

View solution

Q. Larger surface of traveler helps in

View solution

Q. In case of smaller mass of traveler, bobbin will be

View solution

Q. In tangential belt system, one belt usually drives

View solution

Q. If mass of traveler is small then take up tension of yarn will be

View solution

Q. Feature/s of traveler required for producing a particular type of yarn is/are

View solution

Q. In use of tangential belt, there are no pulleys or cylinders under machine, which results in

View solution

Q. Anti balloon rings has

View solution

Q. Yarn guide should be provided with suitable distribution of twists in order to

View solution

Q. A large balloon has

View solution

Q. Increase in yarn tension is proportional to

View solution

Q. High contact between traveler and ring increases friction and temperature. This is due to the

View solution

Q. Maximum speed for nylon glass fibre traveler is calculated to be

View solution

Q. Function/s of Pneumafil is to

View solution

Q. Mass of traveler determines friction between traveler and

View solution