Question

Corresponding to Nusselt number in heat transfer, the dimensionless group in mass transfer is the __________ number.

a.

Sherwood

b.

Schmidt

c.

Peclet

d.

Stanton

Answer: (a).Sherwood

Interact with the Community - Share Your Thoughts

Uncertain About the Answer? Seek Clarification Here.

Understand the Explanation? Include it Here.

Q. Corresponding to Nusselt number in heat transfer, the dimensionless group in mass transfer is the __________ number.

Similar Questions

Explore Relevant Multiple Choice Questions (MCQs)

Q. If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is

Q. Liquid diffusivity is of the order of __________ cm² /second.

Q. The solvent used in liquid extraction should not have high latent heat of vaporisation, because

Q. At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower.

Q. Pick out the correct statement.

Q. When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of

Q. The operation involved when the soluble material is largely on the surface of an insoluble solid and is merely washed off by the solvent is called

Q. In the constant rate period of the rate of drying curve for batch drying,

Q. It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%).

Q. The binary diffusivity in gases at atmospheric conditions is about

Q. Percentage saturation is __________ the relative saturation.

Q. In case of a desorber (stripper), the

Q. What is the reflux ratio at total reflux ?

Q. Under conditions of flooding in packed tower, the gas pressure drop

Q. For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns).

Q. For absorbing a sparingly soluble gas in a liquid

Q. Channelling in a packed tower results from the

Q. The change in enthalpy per unit weight of adsorbed gas when adsorbed on gas free or "outgassed" adsorbent to from a definite concentration of adsorbate is called its

Q. The minimum number of theoretical plates is required for achieving a given separation in distillation column with

Q. At equilibrium the concentration of water in vapour phase (C*)in kg/m³ of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m³ containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is

Recommended Subjects

Are you eager to expand your knowledge beyond Basic Chemical Engineering? We've handpicked a range of related categories that you might find intriguing.

Click on the categories below to discover a wealth of MCQs and enrich your understanding of various subjects. Happy exploring!