E-PolyLearning

Discussion Forum

Que. For a plane wall of thickness l with uniformly distributed heat generation q g per unit volume, the temperature t₀ at mid plane is given by
a. t₀ = q g l²/2k +t w
b. t₀ = q g l²/4k +t w
c. t₀ = q g l²/8k +t w
d. t₀ = q g l²/16k +t w
Correct Answer:t₀ = q g l²/8k +t w
Confused About the Answer? Ask fellow aspirants for Details Here
Already Know Explanation? Add it Here to help others.

More Questions Like this:

A solid sphere of 8 cm radius has a uniform heat generation of 4000000 W/m³. The outside surface is exposed to a fluid at 150 degree Celsius with convective heat transfer coefficient of 750 W/m² K. If thermal conductivity of the solid material is 30 W/m K, determine maximum temperature
A slab of 12 cm thickness and generating heat uniformly at 10⁶ W/m³ has thermal conductivity of 200 W/m degree. Both surfaces of the slab are maintained at 150 degree Celsius. Determine the heat flow rate at the quarter planes
A 25 mm diameter egg roll (k = 1 W/m degree) is roasted with the help of microwave heating. For good quality roasting, it is desired that temperature at the center of roll is maintained at 100 degree Celsius when the surrounding temperature is 25 degree Celsius. What should be the heating capacity in W/m³ of the microwave if the heat transfer coefficient on the surface of egg roll is 20 W/m² degree?
Dielectric heating apparatus consists of
An 8 cm diameter orange, approximately spherical in shape, undergoes ripening process and generates 18000 k J/m³ hr of energy. If external surface of the orange is at 6.5 degree Celsius, find out the temperature at the center of the orange. Take thermal conductivity = 0.8 k J/ m hr degree for the orange material
A hollow sphere (k = 30 W/m K) of inner radius 6 cm and outside radius 8 cm has a heat generation rate of 4000000 W/m³. The inside surface is insulated and heat is removed by convection over the outside surface by a fluid at 100 degree Celsius with surface conductance 300 W/m² K. Make calculations for the temperature at the outside surfaces of the sphere
Consider a slab of thickness δ with one side (x = 0) insulated and other side (x = δ) maintained at constant temperature. The rate of uniform heat generation within the slab is q g W/m³. Presuming that the heat conduction is in steady state and one dimensional along x direction, the maximum temperature in the slab would occur at x equal
Consider a 1.2 m thick slab of poured concrete (k = 1.148 W/m degree) with both of side surfaces maintained at a temperature of 20 degree Celsius. During its curing, chemical energy is released at the rate of 80 W/m³. Workout the maximum temperature of concrete
Notable example of uniform generation of heat within the conducting medium are

(i) Energy of a nuclear reactor

(ii) Liberation of energy due to some exothermic chemical reactions

(iii) Resistance heating in electrical appliances

Which of the statements made above are correct?
Identify the correct boundary condition for a hollow sphere with inside surface insulated.
The constants of integration are to be determined from the relevant boundary conditions which are
(i) t = t w at r = R
(ii) q g (π L R²) = -k (2 π R L) (d t/d r)
(iii) Increasing temperature gradient
Choose the correct option?
Consider heat conduction through a solid sphere of radius R. There are certain assumptions

(i) Unsteady state conditions
(ii) One-dimensional radial conduction
(iii) Constant thermal conductivity

Identify the correct statements
A slab of insulating material of thickness 6 cm and thermal conductivity 1.4kJ/m hr deg is placed between and is in contact with two parallel electrodes, and is then subjected to high frequency dielectric heating at a uniform rate of 140,000kJ/m³ hr. At steady state coefficients of combined radiation and convection are 42 and 48 kJ/m² hr deg. If atmospheric temperature is 25 degree Celsius, find surface temperatures?
In case of heat conduction through plane wall, which one of the following is not a correct assumption?
A concrete column used in bridge construction is cylindrical in shape with a diameter of 1 meter. The column is completely poured in a short interval of time and the hydration of concrete results in the equivalent of a uniform source strength of 0.7 W/kg. Determine the temperature at the center of the cylinder at a time when the outside surface temperature is 75 degree Celsius. The column is sufficiently long so that temperature variation along its length may be neglected. For concrete
Average thermal conductivity = 0.95 W/m K
Average density = 2300 kg/m³
In case when both the surfaces of plane wall are at different temperature, we get an expression i.e.

T MAX – T W2 /T W1 – TW2 = (B + 1)²/4B

What is the value of B?
Unit of specific resistance is
The insulating material used in dielectric heating is
Generally heat generated depends on some parameters. It is directly proportional to
If Q X is heat generated in at distance ‘x’, then heat conducted out at a distance (x + d x) will be

View All Questions on: Conduction With Heat Generation

Management and Accounting

Human Resource Management Marketing and Marketing Management Financial Management and Financial Markets Cost Accounting Business Statistics