Q. Find the vapour pressure of component A in an ideal mixture, if its liquid composition and the partial pressure is 0.65 and 260 mmHg.

View solution

Q. Consider an ideal vapour-liquid binary mixture, find the total pressure if the vapour pressure of A is 260 mmHg and the vapour pressure of B is 520 mmHg and the composition of A in mole fraction is 0.55.

View solution

Q. Guess the exact relation between the vapour phase mole fraction and relative volatility.

View solution

Q. Given the total pressure is 2 atm. Also the partial pressure of the two components in an ideal solution is 1 atm and 0.5 atm. It shows __________ deviation.

View solution

Q. If the vapour pressure of the two components in a binary mixture is same, then it is a________

View solution

Q. Minimum boiling azeotrope has_________

View solution

Q. Alternative word of Azeotrope is a Differential-boiling point.

View solution

Q. Negative deviation is due to a total pressure less than the pressure obtained from Hendry’s law.

View solution

Q. Azeotropic composition can be eliminated by

View solution

Q. When the two liquid mixtures are completely insoluble then the total pressure of the mixture is

View solution

Q. Consider an insoluble mixture A and B; Find the Total pressure of the system.

Vapour pressure of A= 50mmHg
Vapour pressure of B= 100 mmHg

View solution

Q. Ordinary distillation cannot separate Azeotrope.

View solution

Q. Flash vaporization is a

View solution

Q. The feed is directly passed to the flash vaporization column

View solution

Q. Binary mixture of 100 kmol/hr enters into a flash drum has equimolar composition. The distillate obtained is 60 kmol/hr and the enthalpy of distillate, residue and feed are 500 KJ/kmol, 200 KJ/kmol and 400 KJ/kmol. Find the bottom flow rate in kmol/hr.

View solution

Q. Find the ratio of distillate to residual flow rates, if a binary mixture containing 65% of more volatile component while the distillate and the residue compositions are 90% and 30%.

View solution

Q. What happens to the liquid after preheating when enter to the cyclonic flash drum?

View solution

Q. Express the flash vaporization

View solution

Q. Find the heat given( in KJ) to the feed for the flash vaporization process if the ratio of residue to the distillate is 0.65 and the enthalpy of feed, distillate and the residue are 500, 800 and 200 KJ/kmol respectively. The feed rate is 100 kmol/hr.

View solution

Q. Find the distillate and the residue rates in mole/hr, if the feed rate is 100 mol/hr; The compositions of feed, distillate and residue in terms of mole fraction are 0.65, 0.9 and 0.2.

View solution