Question
k =3.64 * 10⁻² W/m K
v =30.09 * 10⁻⁶ m²/s
P ᵣ =0.682
Β =1/160 + 273 = 2.31 * 10⁻³ per K
a.
1156.5 W
b.
1146.5 W
c.
1136.5 W
d.
1126.5 W
Posted under Mass Transfer
Interact with the Community - Share Your Thoughts
Uncertain About the Answer? Seek Clarification Here.
Understand the Explanation? Include it Here.
Q. A steam pipe 50 mm diameter and 2.5 m long has been placed horizontally and exposed to still air at 25 degree Celsius. If the pipe wall temperature is 295 degree Celsius, determine...
Similar Questions
Explore Relevant Multiple Choice Questions (MCQs)
Q. A steam pipe 50 mm diameter and 2.5 m long has been placed horizontally and exposed to still air at 25 degree Celsius. If the pipe wall temperature is 295 degree Celsius, find out the Grashof number. At the mean temperature difference of 160 degree Celsius, the thermo-physical properties of air are
k =3.64 * 10⁻² W/m K
v =30.09 * 10⁻⁶ m²/s
P ᵣ =0.682
Β =1/160 + 273 = 2.31 * 10⁻³ per K
View solution
Q. Estimate the heat transfer from a 40 W incandescent bulb at 125 degree Celsius to 25 degree Celsius in quiescent air. Approximate the bulb as a 50 mm diameter sphere. The approximate correlation for the convection coefficient is
Nu = 0.60 (Gr Pr)^ 0.25
Where the different parameters are evaluated at the mean film temperature, and characteristics length is the diameter of the sphere.
View solution
Q. A 40 W incandescent bulb at 125 degree Celsius to 25 degree Celsius in quiescent air. Approximate the bulb as a 50 mm diameter sphere. The approximate correlation for the convection coefficient is
Nu = 0.60 (Gr Pr)^ 0.25
Where the different parameters are evaluated at the mean film temperature, and characteristics length is the diameter of the sphere.
Find what percent of power is lost by free convection?
View solution
Q. More than one tie line is represented in an equilibrium triangular system is known as
View solution
Q. Find the slope of the operating line for the first stage if the dilutant in the feed is 5 kg and the solvent used for the second stage is 10 kg.
View solution
Q. Plait point never occurs in the multistage operations.
View solution
Q. A mixture undergoing multicomponent diffusion is analyzed through the Maxwell-Stefan approach. With regard to this approach which among the following statements are incorrect? The difference in the partial pressure of the Component A over a small distance ∆z (AB) is proportional to
View solution
Q. If all the components except 1 of the multicomponent diffusing mixture are inert, then what will be the expression for Diffusivity of component 1 in the mixture?
View solution
Q. A mixture of 60% hydrogen and 40% oxygen is blowing over a pan of water at 1atm pressure. The bulk gas temperature is 30°C and the water temperature is 20°C. The vapor pressure of water at this temperature is 17.53mm Hg. The concentration of moisture in the bulk gas is negligible and the diffusivity values are DO₂-H₂O=0.357cm²/s, DH₂-H₂O=0.972cm²/s at 34°C and DH₂-O₂=0.891cm²/s at 43°C.
Which of the following statements are correct?
View solution
Q. A mixture of 60% hydrogen and 40% oxygen is blowing over a pan of water at 1atm pressure. The bulk gas temperature is 30°C and the water temperature is 20°C. The vapor pressure of water at this temperature is 17.53mm Hg. The concentration of moisture in the bulk gas is negligible and the diffusivity values are DO₂-H₂O=0.357cm²/s, DH₂-H₂O=0.972cm²/s at 34°C and DH₂-O₂=0.891cm²/s at 43°C.
What will be the values of the diffusivities (in cm²/s) at the mean gas-film temperature?
View solution
Q. A mixture of 60% hydrogen and 40% oxygen is blowing over a pan of water at 1atm pressure. The bulk gas temperature is 30°C and the water temperature is 20°C. The vapor pressure of water at this temperature is 17.53mm Hg. The concentration of moisture in the bulk gas is negligible and the diffusivity values are DO₂-H₂O=0.357cm²/s, DH₂-H₂O=0.972cm²/s at 34°C and DH₂-O₂=0.891cm²/s at 43°C.
What is the value of the flux (kmol/m³.s) of water vapor through a stagnant film of estimated thickness 1.5mm on the water surface?
View solution
Q. For a steady state equimolar counter diffusion of A and B. The N flux of A is ________
View solution
Q. The value of a ratio of N flux of A to the total N flux for a steady state equimolar counter diffusion is
View solution
Q. In sulphuric acid plants dry air is used for burning of sulphur. Air is dried in contact with concentrated Sulphuric acid. Moisture diffuses through a layer of air, reaches the surface and gets absorbed in it. Here air is said to be non-diffusing were as moisture is diffusing. Which of the following statements are correct?
View solution
Q. Consider steady-state equimolar counterdiffusion through the converging-diverging tube. Given: r₁=1cm; r₂=2cm; Nᴀ=10⁻⁶ kmol/m².s at the vessel 1 end of the tube. The rate of transport of B at the vessel 2 end of the tube is
View solution
Q. Two large vessels containing gaseous mixture of A and B at different concentrations but at the same total pressure are connected by a tapered tube of length 15cm and end diameters 1cm and 4 cm. what should be the diameter of a cylindrical tube of the same length that allows the same rate of transport of A?
View solution
Q. Two large vessels containing gaseous mixture of A and B at different concentrations but at the same total pressure are connected by a tapered tube of length 15cm and end diameters 1cm and 4 cm. At which point of the following locations in the tapered tube, the magnitude of the flux maximum?
View solution
Q. Equimolar counterdiffusion of A and B occurs through a spherical film of i.d=rᵢ and thickness δ. The flux of A is Nᴀ₁ at r=rᵢ. The flux through a flat film of the same thickness is Nᴀ₂. if Nᴀ₁ is larger than Nᴀ₂ by 5%, the film thickness δ is
View solution
Q. A napthelene hemisphere is placed on a glass plate and a napthelene ball of identical diameter is kept suspended in the stagnant air in two large rooms. The respective shapes of the ball are maintained while they sublime and reduce in size. Which of the following statements are true in this connection?
View solution
Q. Sublimation of a long cylinder made of napthelene occurs in a large volume of stagnant air. The time required for its complete sublimation is
View solution
Recommended Subjects
Are you eager to expand your knowledge beyond Mass Transfer? We've handpicked a range of related categories that you might find intriguing.
Click on the categories below to discover a wealth of MCQs and enrich your understanding of various subjects. Happy exploring!