Q. _________ act as a coupling agent between oil oil/water phases.

View solution

Q. An emulsion is a _____ system.

View solution

Q. Surfactants and finely divided solids _____the stability of the emulsion.

View solution

Q. Organo clays are manufactured by modifying _____with quaternary amines.

View solution

Q. What is the range of charge present on bentonite?

View solution

Q. The design of oil/water separators is based on _________

View solution

Q. Compute the required pressure for the flotation thickener without recycle for the following information:

A/S = 0.008 mL/mg
Temperature: 20 degree Celsius
Air solubility: 18.7 mL/L
Recycle steam pressure: 275 kPa
Fraction of saturation: 0.5
Surface Loading rate: 8 L/m²/min
Sludge flow rate: 400 m³/d

View solution

Q. Determine the surface area for the following information.

A/S = 0.008 mL/mg
Temperature: 20 degree Celsius
Air solubility: 18.7 mL/L
Recycle steam pressure: 275 kPa
Fraction of saturation: 0.5
Surface Loading rate: 8 L/m²/min
Sludge flow rate: 400 m³/d

View solution

Q. Compute the required recycled rate for the flotation thickener with recycle for the following information:

A/S = 0.008 mL/mg
p = 275 atm
Temperature: 20 degree Celsius
Air solubility: 18.7 mL/L
Recycle steam pressure: 275 kPa
Fraction of saturation: 0.5
Surface Loading rate: 8 L/m²/min
Sludge flow rate: 400 m³/d

View solution

Q. Determine the surface area with recycle for the following information.

A/S = 0.008 mL/mg
Temperature: 20 degree Celsius
Air solubility: 18.7 mL/L
Recycle steam pressure: 275 kPa
Fraction of saturation: 0.5
Surface Loading rate: 8 L/m²/min
Sludge flow rate: 400 m³/d

View solution

Q. What is the velocity considered for a flotation thickener to remove oil?

View solution

Q. Lamella clarifier is also called as a inclined plate settler.

View solution

Q. Lamella clarifiers can also be used in mining industries.

View solution

Q. __________ maintain the required water quality to the membrane without the use of chemicals.

View solution

Q. Lamella clarifiers are used as pre-treatment ahead of _____

View solution

Q. What is the length of the tube in lamella clarifiers?

View solution

Q. How much spacing should be provided in between the tubes?

View solution

Q. What is the maximum load of solids that lamella clarifiers can handle?

View solution

Q. What is the retention time for rectangular clarifiers?

View solution

Q. What is the range of overflow rate for circular clarification unit?

View solution