Q. A block of material of specific gravity 0.45 floats in water. Determine the meta-centric height of the block if its size is 3 m * 2 m* 0.8 m.

View solution

Q. A solid cylinder of diameter 4.5 has a height of 2.5 metres. Find the meta-centric height of the cylinder when it is floating in water with its axis vertical. The sp. gr. of the cylinder=0.45.

View solution

Q. In case of spherically shaped bodies of uniform mass distribution and completely immersed in fluid and floating, the centre of buoyancy coincides with centre of gravity.

View solution

Q. Proper explanation for metacentre is:

View solution

Q. The metacentric height is affected by the change in density.

View solution

Q. or a completely immersed body, the metacentric height is always zero.

View solution

Q. Meta centre always lies below the centre of gravity

View solution

Q. The principle of floatation of bodies is based on the premise of

View solution

Q. A solid cylinder of diameter 5.0 m has a height of 6.0 m. Find the meta-centric height of the cylinder if the specific gravity of the material of cylinder 0.45 and it is floating in water with its axis vertical.

View solution

Q. A solid cylinder of 15 cm diameter and 40 cm long, consists of two parts made of different materials. The first part at the base is 1.5 cm long and of specific gravity=6.5. The other part of the cylinder is made of the material having specific gravity 0.75. State, if the it can float vertically in water.

View solution

Q. A wooden cylinder of sp.gr. = 0.6 and circular in cross-section is required to float in oil(sp.gr. = 0.90). Find the L/D ratio for the cylinder to float with its longitudinal axis vertical in oil, where L is the height of cylinder and D is its diameter.

View solution

Q. A cylinder(uniform density distribution) of radius 3.0 m has a height of 9.0 m. The specific gravity of the material of cylinder 0.85 and it is floating in water with its axis vertical. State whether the equilibrium is stable or unstable.

View solution

Q. If the magnitude of dimension of a rectangular wooden block is length>breadth>height, then for it to float on the water, it should be immersed in what manner?

View solution

Q. When body is completely or partially immersed in a fluid, how much its weight be distributed for it to be in stable equilibrium.

View solution

Q. In unstable equilibrium what is the relation between forces?

View solution

Q. The floating body is said to be in unstable equilibrium if the metacentre is below the centre of gravity.

View solution

Q. The floating body is said to be in neutral equilibrium if the metacentre is above the centre of gravity.

View solution

Q. In stable equilibrium for completely submerged bodies what is the relation between forces?

View solution

Q. The below figure shows an inclined U-tube mercury manometer. The vertical end of the tube is exposed to a gas of gauge pressure 50 kPa and the inclined end is exposed to the atmosphere. The inclined part of the tube is at an angle of 30° with the horizontal. Find the value of h (in cm) (take g = 9.8 m/s², ρmercury = 13600 kg/m³)

View solution

Q. In the manometer given above, 2 immiscible fluids mercury (ρ = 13600 kg/m³) and water (ρ = 1000 kg/m³) are used as manometric fluids. The water end is exposed to atmosphere (100 kPa) and the mercury end is exposed to a gas. At this position, the interface between the fluids is at the bottom most point of the manometer. Ignore the width of the manometer tube and the radius of curvature. The value of h is found to be 9.45 m. The height of the mercury column is given to be 75 cm. Find the gauge pressure of the gas. (g = 9.8 m/s²)

View solution