Q. According to IRC:15-2002, Maximum nominal size of aggregates is ________

View solution

Q. According to IRC:15-2011, Maximum nominal size of aggregates is ________

View solution

Q. According to IRC:15-2011, Minimum cement content for 4.5 N/mm² characteristic flexural strength for OPC _____________

View solution

Q. According to IRC:15-2011, Minimum cement content for 4.5 N/mm² characteristic flexural strength for PPC _________

View solution

Q. According to IRC:15-2011, Minimum cement content for 4.5 N/mm² characteristic flexural strength for OPC + fly ash mix OPC ____________

View solution

Q. According to IRC:15-2011, maximum free W/C ratio for OPC is ________________

View solution

Q. According to IRC:15-2011, maximum free W/C ratio for PPC is _________

View solution

Q. IS code for Specification for ordinary Portland cement, 33 grade?

View solution

Q. IS code for Specification for coarse and fine aggregates from natural sources for concrete?

View solution

Q. IS code for Specification for Portland slag cement?

View solution

Q. IS Code of practice for plain and reinforced concrete is ________

View solution

Q. IS 457:1957 is for ____________

View solution

Q. IS 1489(Part 1):1991 is for ____________

View solution

Q. IS 1489(Part 2):1991 is for ____________

View solution

Q. IS 1727:1967 is for __________________

View solution

Q. IS 650:1991 is for ____________

View solution

Q. IS 1199:1959 is for ____________

View solution

Q. Loss on Ignition (L.O.I.) is the loss in weight of cement after being heated to ____________

View solution

Q. When sand is fully dry then it’s volume is _________

View solution

Q. The mineral oil if present in mixing for concrete ______________

View solution