Q. The fuel that detonates easily, is

View solution

Q. When the engine speed increases, the ignition timing must be advanced.

View solution

Q. The condition that results in large quantities of CO emission is

View solution

Q. In comparison with a radial tyre, one advantage of a bias-ply tyre is

View solution

Q. The sequence order of events in a four-stroke engine is

View solution

Q. Which of the following is not a part of the chassis ?

View solution

Q. The capacity of a battery is usually expressed in terms of

View solution

Q. The PCV valve incorporates a spring loaded plunger and opens in proportion to the level of vacuum pressure in the intake manifold.

View solution

Q. The motion of the cam is transferred to the rocker arm, moving it upwards and downwards. This rocker-arm motion then forces the valve downwards against the force in the valve spring so that the valve can open.

View solution

Q. The fuel pump in the programmed fuel injection (PFI) system is located

View solution

Q. The camshaft of a four stroke Diesel engine running at 1000 rpm will run at

View solution

Q. The main merit of a multi-cylinder type cylinder sleeve is

View solution

Q. Vulcanizing means

View solution

Q. The engine torque increases with the increase in engine speed up to a certain point after which it starts to fall down.

View solution

Q. The instrument used to check specific gravity of acid in a battery is

View solution

Q. The material generally used for cylinder sleeves is

View solution

Q. When turning a corner,

View solution

Q. The commonly used antifreeze solution in automobiles is

View solution

Q. The indicated power of a four-stroke engine (in watts) is equal to (where P = Mean effective pressure in N/m², L = Length of stroke in metres, A = Cross-sectional area of the piston in m², and N = Speed of the engine in revolutions per second (r.p.s))

View solution

Q. Engine misfiring is likely to result from

View solution