Q. Which of the following impellers generate a flow parallel to the axis of shaft?

View solution

Q. What is the effect of the concentration of dissolved salts and sugars on the oxygen transfer rate?

View solution

Q. In a two-phase system where the continuous phase remains in place, the gas hold up can be expressed as (where Vs and Vt are the superficial gas velocity and bubble rise velocity)

View solution

Q. In a bioreactor, if at a particular time the oxygen transfer rate is 23 kg.h­¹, then the oxygen uptake will be

View solution

Q. For turbulent flow, Reynolds number is correlated with power number as (where K, a constant which depends on the container geometry and shape of stirrer; Rei, is Reynolds number for agitator; Di, stirrer diameter and N, stirrer speed)

View solution

Q. For laminar flow, Reynolds number is correlated with power number as (where K, a constant which depends on the container geometry and shape of stirrer; Rei is Reynolds number for agitator; Di, stirrer diameter and N, stirrer speed)

View solution

Q. Turbulent flow range of mixing speed is obtained for

View solution

Q. The effect of increasing the stirrer speed in an unbaffled stirred tank reactor is that

View solution

Q. An increase in the heat transfer in the stirred tank reactor will be observed at

View solution

Q. If the stirring speed increased from 300 to 500 rpm leads to an increase in the reaction rate by two folds. Then it may be concluded that

View solution

Q. Oxygen transfer rate is increased with an increase in the stirrer speed in aerated bioreactor because

View solution

Q. Bioreactors, where vortex is formed, another dimensionless number, __________ is useful.

View solution

Q. Axial flow impellers

View solution

Q. The power required by an agitator operating in a gas-sparged system is

View solution

Q. The main function of the dimples provided in the cooling jacket is to

View solution

Q. A higher liquid height will lead to a higher gas hold up by which the oxygen transfer rate will be

View solution

Q. Which of the following number is calculated from the diameter and peripheral speed of the impeller?

View solution

Q. Laminar flow range of mixing speed is obtained for

View solution

Q. Which device is commonly used for measuring the rate of rotation (rpm) of the stirrer shaft?

View solution

Q. Which of the following will have the largest interfacial area per unit volume?

View solution