Q. The bearing of C from A is N 30° E and from B, 50 metres east of A, is N 60° W. The departure of C from A is

View solution

Q. Pick up the correct statement from the following :

View solution

Q. The rise and fall method of reduction of levels, provides a check on

View solution

Q. In tangential tacheometry, an ordinary level staff is used

View solution

Q. The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as

View solution

Q. While surveying a plot of land by plane tabling, the field observations

View solution

Q. If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on

View solution

Q. If the length of a chain line along a slope of θ° is l, the required slope correction is

View solution

Q. The sag of 50 m tape weighing 4 kg under 5 kg tension is roughly

View solution

Q. Ranging is an operation of

View solution

Q. Pick up the correct statement from the following :

View solution

Q. Surveys which are carried out to provide a national grid of control for preparation of accurate maps of large areas, are known

View solution

Q. In a theodolite

View solution

Q. Whole circle bearing of a line is preferred to a quadrantal bearing merely because

View solution

Q. The slope correction for a 3° slope for a length of 100 m, is

View solution

Q. In horizontal angles, the error due to imperfect levelling of the plate bubble is

View solution

Q. Pick up the correct statement from the following :

View solution

Q. Pick up the correct statement from the following :

View solution

Q. The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in

View solution

Q. The first reading from a level station is

View solution