Q. Whole circle bearing of a line is preferred to a quadrantal bearing merely because

View solution

Q. The slope correction for a 3° slope for a length of 100 m, is

View solution

Q. In horizontal angles, the error due to imperfect levelling of the plate bubble is

View solution

Q. Pick up the correct statement from the following :

View solution

Q. Pick up the correct statement from the following :

View solution

Q. The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in

View solution

Q. The first reading from a level station is

View solution

Q. If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is

View solution

Q. The length of a traverse leg may be obtained by multiplying the latitude and

View solution

Q. Pick up the correct statement from the following :

View solution

Q. An internal focussing type surveying telescope, may be focussed by the movement of

View solution

Q. An imaginary line lying throughout on the surface of the earth and preserving a constant inclination to the horizontal, is called

View solution

Q. An angles of 45° with a chain line may be set out with

View solution

Q. Pick up the correct statement from the following :

View solution

Q. The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as

View solution

Q. A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A and B were 1.11 and 1.39. The correct staff reading from this set up at S should be

View solution

Q. The staff intercept will be

View solution

Q. Horizontal distances obtained tacheometerically are corrected for

View solution

Q. If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is

View solution

Q. Pick up the correct statement from the following :

View solution