Q. Locating the position of a plane table station with reference to three known points, is known as

View solution

Q. If D is the degree of the curve of radius R, the exact length of its specified chord, is

View solution

Q. If the chain line which runs along N-S direction is horizontal and the ground in E-W direction is sloping

View solution

Q. A lens or combination of lenses in which the following defect is completely eliminated is called aplanatic

View solution

Q. While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be

View solution

Q. In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs)

View solution

Q. Straight, parallel and widely spaced contours represent

View solution

Q. The theodolites used for making tacheometric observations by optical wedge system, are

View solution

Q. Tilt of the staff in stadia tacheometry increases the intercept if it is

View solution

Q. To orient a plane table at a point with two inaccessible points, the method generally adopted, is

View solution

Q. The combined effect of curvature and refraction over a distance L kilometres is

View solution

Q. Number of links per metre length of a chain are

View solution

Q. Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is

View solution

Q. The constant vertical distance between two adjacent contours, is called

View solution

Q. The reduced level of a floor is 99.995 m, the staff reading on the floor is 1.505 m. If the inverted staff reading against the roof is 1.795 m, the floor level below the slab, is

View solution

Q. The correction to be applied to each 30 metre chain length along θ° slope, is

View solution

Q. If + 0.8% grade meets - 0.7% grade and the rate of change of grade for 30 m distance is 0.05, the length of the vertical curve will be

View solution

Q. The included angles of a theodolite traverse, are generally measured

View solution

Q. Location of contour gradient for a high way is best set out from

View solution

Q. If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, prismoidal correction for a level section is

View solution