Q. The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 km ph, is

View solution

Q. Along high ways confirmatory route markers are generally fixed

View solution

Q. Length of vehicles does not affect

View solution

Q. If L is the length of a moving vehicle and R is the radius of curve, the extra mechanical width b to be provided on horizontal curves,

View solution

Q. The desirable camber for straight cement concrete roads, is

View solution

Q. Minimum permissible speed on high speed roads, is decided on the basis of

View solution

Q. The ideal shape of a transition curve, is

View solution

Q. At a road junction, 7 cross conflict points are severe if

View solution

Q. Minimum thickness of the base of a flexible pavement, is

View solution

Q. One-way streets are generally provided in crowded cities as, these

View solution

Q. The perpendicular offset from the tan-get to the central point of the circular curve, is

View solution

Q. An Executive Engineer of roads, executes works under direct control of

View solution

Q. Newly constructed pavement with ordinary Portland cement attains its working strength after

View solution

Q. The correct formula for calculating superelevation for the hill roads, is

View solution

Q. The inventor of road making as a building science, was

View solution

Q. Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm², is

View solution

Q. Design of horizontal curves on highways, is based on

View solution

Q. Speed regulations on roads is decided on the basis of

View solution

Q. Reconnaissance is best done with the help of

View solution

Q. The usual width of side drains along Highways in hilly region, is

View solution