Q. Reduction of load capacity in a ruling gradient of

View solution

Q. Over taking time required for a vehicle with design speed 50 km ph and overtaking acceleration 1.25 m/sec² to overtake a vehicle moving at a speed 30 km ph, is

View solution

Q. The maximum comfortable retardation applied to moving vehicles, is

View solution

Q. Gradient resistance of moving vehicles along down slopes, is

View solution

Q. Thickness of broken centre line markings for a four lane road, is generally kept

View solution

Q. Maximum number of vehicles that can pass a given point on a lane during one hour without creating unreasonable delay, is known as

View solution

Q. The desirable camber for straight roads with water bound macadam or gravel surface, is

View solution

Q. In case of a hair pin bend of a highway,

View solution

Q. The length of a transition curve, is governed by

View solution

Q. Along horizontal curves, if centrifugal force exceeds lateral friction, vehicles may

View solution

Q. A subsidiary area in a carriageway placed so as to control the movement of the traffic, is

View solution

Q. Pick up the incorrect statement from the following. If water cement ratio is

View solution

Q. Ruling gradient on hill roads 300 m above M.S.L. is kept

View solution

Q. According to Indian Road Congress, the width of carriageway, is

View solution

Q. The minimum cross fall of shoulders is kept

View solution

Q. While calculating the overtaking sight distance, the height of the object above road surface, is assumed

View solution

Q. Set-back distance is the distance between

View solution

Q. Horizontal curves on highways are provided

View solution

Q. In welded wire mesh, the longitudinal wire is placed at

View solution

Q. Along a hill road, a side drain is provided on

View solution