Q. Two coils X and Y have self inductances of 5 mH and 10 mH and mutual inductance of 3 mH. If the current in coils X change at a steady rate of 100 A/s, the emf induced in coil Y is

View solution

Q. Two capacitors of 2 μF and 4 μF capacitance are connected in series across a 30 V dc battery. After the capacitors have been charged, the voltage across them will be

View solution

Q. A 50 Hz current has an amplitude of 10 A. The rate of change of current at t = 0.005 after i = 0 and is increasing is

View solution

Q. In an air cored coil, a current of 0.7 A causes a flux of 5 x 10^-6 Wb. If the core is made of cast iron and the coil is similar, the same current can set up a flux of about

View solution

Q. The self inductances of two coils are 27 H and 3 H. If the winding or coils is such that 50% of flux of one links the other, the mutual inductance is

View solution

Q. In a lead acid cell, the positive plate has spongy lead.

View solution

Q. For H(s) to be positive real, the condition Re[H(jω)] ≥ 0 for 0 ≤ ω ≤ ∞ is

View solution

Q. A parallel plate capacitor with air as dielectric has a capacitance C. If the dielectric has a dielectric constant ∈ᵣ and the remaining dimensions are the same, the capacitance will be

View solution

Q. Assertion (A): When excited by a unit step voltage, an inductor behaves as open circuit at t = 0.

Reason (R): Inductance has the property of inertia.

View solution

Q. A bulb rated at 60 W, 120 V is used for 30 minutes. The charge associated with this operation is

View solution

Q. Two coil have their axis perpendicular to each other. The coefficient of coupling k is

View solution

Q. In a series RLC circuit, p-f is leading if XC < XL.

View solution

Q. An RLC series circuit is fed form 100 V ac supply. Inductance is 1 H and Q = 7.5. At resonance, the voltage across inductance is

View solution

Q. As temperature increases, the temperature coefficient of a metal

View solution

Q. A wire has a resistance R ohm. If another wire of the same material and same weight has double the diameter (as compared to the first wire), the resistance of the second wire will be

View solution

Q. When cells having different emfs are connected in parallel, a circulating current flows.

View solution

Q. In a specimen of cast iron, a field strength of 400 AT/m cause a flux density of 0.6 T. In a specimen of silicon steel, the same value of H would cause B to be

View solution

Q. The realization of a term K₀/s in the impedance function will give

View solution

Q. An RL admittance function can also be realized as

View solution

Q. In an R-C circuit, the impedance is 40 Ω at a frequency of 100 Hz. At 200 Hz the impedance should be

View solution