Q. Two capacitors each of capacitance C and breakdown voltage V are joined in series. The capacitance and breakdown voltage of the combination is

View solution

Q. A capacitor can be represented by a capacitance C in parallel with a resistance R. For a good capacitor, the resistance R should be

View solution

Q. If a sheet of a mica is inserted between the plates of an air capacitor, the capacitance

View solution

Q. A circuit has two branches 1 and 2 in parallel. If |Q1| = 8 KVAR and |Q2| = 6 KVAR, the magnitude of total kvar drawn form supply will be

View solution

Q. When a function Z(s) having a pole at infinity is realized, we get

View solution

Q. A specimen of a material has a resistivity of 1.78 x 10⁸ ohm-m. The material is

View solution

Q. If operator 'a' = 1 ∠120° then (1 + a²) =

View solution

Q. Two 2 port circuits are connected cascaded. To determine the response, it is more convenient to use

View solution

Q. For addition and subtraction operations, phasors

View solution

Q. If VA = - 10 V and VB = - 15 V, VAB = 5 V.

View solution

Q. Assertion (A): Tie set schedule is used in nodal analysis.

Reason (R): Loop currents are fictitious quantities.

View solution

Q. When a lead acid cell discharges, the specific gravity of electrolyte increases.

View solution

Q. For a high pass filter, β = π in attenuation band.

View solution

Q. A minimum function has

View solution

Q. A source of angular frequency 1 rad sec has a source impedance consisting of 1 Ω resistance in series with 1 H inductance. The load that will obtained the maximum power transfer is

View solution

Q. When tracing through a resistance we always get a voltage drop.

View solution

Q. A copper coil has a resistance of 40 ohm at 20°C. At 100°C the resistance is likely to be

View solution

Q. Assertion (A): In a parallel circuit with three branches having R, L and C respectively and fed by a step current I, the current through inductance is always zero.

Reason (R): The time constant of R-L circuit is L/R.

View solution

Q. When a source is delivering maximum power to a load through a network, the ratio of power delivered to the source power

View solution

Q. A two branch parallel tuned circuit has a coil of resistance 100 Ω and inductance 0.005 H in one branch and 10 nF capacitor in the second branch. At resonance frequency, the dynamic resistance is

View solution