Q. Assertion (A): The gate current of an SCR is always in the form of pulses.

Reason (R): The gate losses, in pulse triggering, are low.

View solution

Q. The average load current supplied by a thyristor depends on

View solution

Q. In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160°. The line to line output voltage would be

View solution

Q. A thyristor is reverse biased. A positive gate pulse is applied. The thyristor

View solution

Q. A single phase series converter is used for

View solution

Q. Which of these commutation methods uses an auxiliary SCR?

View solution

Q. In integral cycle control the period of on-off control should be more than mechanical time constant of load.

View solution

Q. A single phase half wave converter is feeding a resistive load. Just before triggering, the voltage across thyristor is

View solution

Q. UJT can be used for

View solution

Q. In a series inverter supplying a load resistance R, the commutating elements L and C should be such that

View solution

Q. In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be

View solution

Q. Induction heating systems require low frequency inverters.

View solution

Q. A single phase half wave controlled rectifier circuit has an R-L load. A freewheeling diode is also in the circuit. When freewheeling diode is conducting the SCR

View solution

Q. An SBS can conduct is one direction only.

View solution

Q. A 750 A circuit uses thyristor of current rating 175 A. If derating is 25%, the number of thyristors in parallel is

View solution

Q. Assertion (A): An inverter does not require forced commutation

Reason (R): A series inverter is a forced commutation inverter.

View solution

Q. In a single phase full wave converter (M - 2 connection), the rms transformer voltage is 300 V across each half of secondary. The PIV for each thyristor is

View solution

Q. A dc separately excited motor has a constant field current. The armature is fed from a single phase supply through a semi-converter. When α = 0, speed is 600 rpm. If α = 90°, the speed is likely to be

View solution

Q. A static induction thyristor

View solution

Q. A single phase step up cycloconverter changes 50 Hz to 100 Hz. Then one half wave of input will give rise to

View solution