Q. In a series inverter supplying a load resistance R, the commutating elements L and C should be such that

View solution

Q. In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be

View solution

Q. Induction heating systems require low frequency inverters.

View solution

Q. A single phase half wave controlled rectifier circuit has an R-L load. A freewheeling diode is also in the circuit. When freewheeling diode is conducting the SCR

View solution

Q. An SBS can conduct is one direction only.

View solution

Q. A 750 A circuit uses thyristor of current rating 175 A. If derating is 25%, the number of thyristors in parallel is

View solution

Q. Assertion (A): An inverter does not require forced commutation

Reason (R): A series inverter is a forced commutation inverter.

View solution

Q. In a single phase full wave converter (M - 2 connection), the rms transformer voltage is 300 V across each half of secondary. The PIV for each thyristor is

View solution

Q. A dc separately excited motor has a constant field current. The armature is fed from a single phase supply through a semi-converter. When α = 0, speed is 600 rpm. If α = 90°, the speed is likely to be

View solution

Q. A static induction thyristor

View solution

Q. A single phase step up cycloconverter changes 50 Hz to 100 Hz. Then one half wave of input will give rise to

View solution

Q. Which of these triggering methods for series connected SCRs use LASCR in the gate circuit?

View solution

Q. A 3 phase ac regulator uses

View solution

Q. A dc circuit breaker must use

View solution

Q. In a single phase full wave regulator feeding R-L load, the minimum firing angle can be zero.

View solution

Q. An RC snubber circuit is used to protect a thyristor against :

View solution

Q. A DIAC has two terminals, anode and cathode.

View solution

Q. A single phase semiconverter has a freewheeling diode. If the firing angle is α and the load is purely resistive, the periods of conduction and freewheeling respectively are

View solution

Q. HVDC transmission systems generally use

View solution

Q. A single phase semiconverter is feeding a highly inductive load. The circuit has a freewheeling diode across the load and firing angle is α. During one cycle of input voltage, the total duration of conduction of freewheeling diode is

View solution